UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Audio (record players, hi-fi etc)

Notices

Vintage Audio (record players, hi-fi etc) Amplifiers, speakers, gramophones and other audio equipment.

Closed Thread
 
Thread Tools
Old 21st Nov 2019, 7:58 pm   #1
liftlatch
Retired Dormant Member
 
Join Date: Nov 2019
Location: Colchester, Essex, UK.
Posts: 1
Default Ferguson 3366 radiogram record deck

Hello
we recently moved into an old Bungalow to renovate. Included in what was left behind (previous owner was 93) was a Ferguson 3366 Radiogram. The radio works very well, lovely sound, but the record player is seized up and the arm is broken at the stylus end. I would like to return the unit to full working order but I am not sure how to identify the record deck, or where to get parts or a new one. Any advice would be very welcome.
many thanks
liftlatch is offline  
Old 21st Nov 2019, 10:55 pm   #2
'LIVEWIRE?'
Rest in Peace
 
'LIVEWIRE?''s Avatar
 
Join Date: Mar 2006
Location: N.W. Oxfordshire(Chipping Norton)
Posts: 7,306
Default Re: Ferguson 3366 radiogram record deck

It's probable that the record deck is a BSR of one model or another. Pictures would help us identify it for certain, but, as more BSR decks were used than Garrard or Collaro ones, I'd plump for BSR, unless anyone else knows otherwise.
'LIVEWIRE?' is offline  
Old 21st Nov 2019, 11:20 pm   #3
Techman
Dekatron
 
Techman's Avatar
 
Join Date: Nov 2009
Location: Lincolnshire, UK.
Posts: 4,985
Default Re: Ferguson 3366 radiogram record deck

It looks like it's probably a BSR record deck.

If the turntable itself is 'frozen', whatever you do don't try to force it round by hand, as it'll rip the bearing out of the chassis below and unless you're very skilled in fabricating a repair to refit the pressed/crimped in bearing, it'll be game over for the deck. You'll need to apply gentle heat (probably via a hot soldering iron) to the spindle hole to melt the grease that's turned to cement over the years.

You won't be able to obtain new parts for these decks as they're decades old, so care will be needed not to break anything. As has been said, pictures of the deck and the problem areas will be helpful. You'll find instructional threads to read regarding record deck servicing in the 'how to' section at the top of the page. There's a very good chance that your deck will be repairable if you follow instructions and work with care.
Techman is offline  
Old 22nd Nov 2019, 9:05 am   #4
Edward Huggins
Dekatron
 
Join Date: Sep 2015
Location: Southwold, Suffolk, UK.
Posts: 8,302
Default Re: Ferguson 3366 radiogram record deck

It's likely to be a very late model Glenburn (aka BSR/McDonald) autochanger. If so the tone arm head is very narrow ("stylus end") and may need to be glued back on with very careful alignment. The turntable platter may made of be plastic so might "flex" off quite easily after lubing first. Photos please!
__________________
Edward.
Edward Huggins is online now  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 1:51 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.