DIY Vinyl Record Cleaning Machine - Page 2 - UK Vintage Radio Repair and Restoration Discussion Forum

Electronpusher0 · 7th Jun 2020, 8:33 am

This is the speed controller I mention in the last post, bought from e-bay, advertised as 4kW (resistive load) so should be OK for a 1.8kW motor.

Peter

ajgriff · 7th Jun 2020, 4:05 pm

Excellent result and very thoughtfully implemented. Hopefully one or two others might be inspired to attempt something similar. The vacuum approach is definitely to be recomended in my view.

Alan

PS The deep bed is looking good too!

7th Jun 2020, 8:33 am	#21
Electronpusher0 Nonode Join Date: Jun 2016 Location: Bognor Regis, West Sussex, UK. Posts: 2,294	Re: DIY Vinyl Record Cleaning Machine This is the speed controller I mention in the last post, bought from e-bay, advertised as 4kW (resistive load) so should be OK for a 1.8kW motor. Peter Attached Thumbnails

7th Jun 2020, 4:05 pm	#22
ajgriff Nonode Join Date: May 2004 Location: Halifax, West Yorkshire, UK. Posts: 2,587	Re: DIY Vinyl Record Cleaning Machine Excellent result and very thoughtfully implemented. Hopefully one or two others might be inspired to attempt something similar. The vacuum approach is definitely to be recomended in my view. Alan PS The deep bed is looking good too!