3rd Mar 2013, 11:52 am | #101 |
Dekatron
Join Date: Jul 2007
Location: Evesham, Worcestershire, UK.
Posts: 4,244
|
Re: Calling Hacker Hunter owners!
Hi Simon,
Your set looks pretty good apart from the badge. It seems that all sets with green/white dials should have brass/chrome badges, but yours is aluminium. Is it possible it was changed at some point? The aluminium badge didn't come in until ~45,000, which I think is when the dial reverted to all-white print. Of course, it's possible that you have an earlier chassis in a later cabinet. It looks like a lovely example that will look like new when cleaned up. If you're stuck, you could always bring the set to me for an RF/IF line-up - Bristol is only an hour from here. Thanks, Mark |
3rd Mar 2013, 4:12 pm | #102 |
Nonode
Join Date: Jan 2004
Location: 1966-1976 Coverack in Cornwall and Helston Cornwall. 1976-present Bristol/Bath area.
Posts: 2,967
|
Re: Calling Hacker Hunter owners!
Thanks Mark after looking at the alignment set up in the manual I would gladly take you up on your offer.
__________________
Simon BVWS member |
1st Apr 2013, 5:55 pm | #103 |
Retired Dormant Member
Join Date: Apr 2013
Location: Norwich, Norfolk, UK.
Posts: 2
|
Re: Calling Hacker Hunter owners!
Just got my mum's Hunter following her sad death a few months ago.
- Model designation RP38 "VHF Hunter" - Serial number 10942 (white sticker inside) - Handle type - single piece with wood effect strip - Grille type - perforated sheet aluminium - Scale print - all white - DC input socket - no - Loudspeaker type and finish - a grey painted frame showing 58HE/146 stamped on it. - Tone control knob style - silver Bought from Snellings of Blofield, Norwich, on 24-10-70 |
1st Apr 2013, 10:27 pm | #104 |
Dekatron
Join Date: Jul 2007
Location: Evesham, Worcestershire, UK.
Posts: 4,244
|
Re: Calling Hacker Hunter owners!
Many thanks for these details - all looks right for the serial number, as expected. Details have been added to the document, and you'll see them when I next get around to uploading it. I'll also add the set to the Hacker Radio Yahoo group in a moment...
I remember Snellings from my time in Norwich It seems that this particular set could have been in stock for a while before sale - I say that because I've got a record of a later RP38A (14291) that was produced in the same month of 1970. Also, I've another set (12903) that has a capacitor with a dated 20/10/69, which is interesting. I've no idea how long that capacitor would have taken to get to Hacker via the various distributors, and how long it would have been sat in the factory before fitting, but perhaps a month or two? Of course, these snippets of information are just one of the things that has made this exercise so interesting. Thanks again, Mark |
21st Jun 2013, 7:49 pm | #105 |
Retired Dormant Member
Join Date: Jun 2013
Location: Leigh, Lancashire, UK.
Posts: 36
|
Re: Calling Hacker Hunter owners!
Hi Mark
Here are the details of my recently acquired Hunter which is in excellent working condition. Model designation (RP38 or RP38A, "VHF Hunter" or "Hunter fm/am") RP38A VHF Hunter - Serial number. 35430 - Handle type (single piece or the later 3-piece type). Single piece - Grille type (sheet aluminium or extruded aluminium) Sheet aluminium - Scale print (all white, or with some green) Some green - DC input socket (or not!) DC socket Present - Loudspeaker type and finish (most were "gold" Elac, earlier ones had a grey painted frame, earliest examples used a Goodmans loudspeaker) Gold Elac - Tone control knob style (most were silver, the very later ones were black+chrome) Silver with black ring at base. Hope this proves useful. Jim |
24th Aug 2013, 4:07 pm | #106 |
Dekatron
Join Date: Aug 2013
Location: Wigan, Greater Manchester, UK.
Posts: 9,433
|
Re: Calling Hacker Hunter owners!
Hope this info is not too late, I have just found the forum.
RP38A Hunter VHF S/N 51287 Extruded Aluminium All White DC Input Skt Gold Elac Speaker Tone control Chrome with black skirt PSU VP408 Bought early 1970's probably 1973/74 and still working. Thats 40 years ago, were did it all go. I worked in a small radio and TV shop in the 60's and 70's, we were Hacker and Roberts agents. It is a long time since I was fixing radios and TV's, reading the forum information that I had long forgotten brings back memories. |
2nd Sep 2013, 6:13 pm | #107 |
Retired Dormant Member
Join Date: Sep 2013
Location: Fife, UK.
Posts: 1
|
Re: Calling Hacker Hunter owners!
Just found the forum too and have just acquired a:
RP38A Hunter VHF S/N 60005 Handle Single Piece Grille extruded aluminium Scale print All white DC Socket present Loudspeaker type Gold Elac Tone controls Chrome with black ring at base. Hope this helps Bob |
27th Dec 2013, 10:26 pm | #108 |
Tetrode
Join Date: Oct 2013
Location: Southampton, Hampshire, UK.
Posts: 50
|
Re: Calling Hacker Hunter owners!
If anyone's still interested, I've just acquired my first Hacker - and very nice it is too. The only point of interest that I can see is that, with serial no. 49,199, it is the latest model, of those obtained, to have a sheet mesh aluminium grille. Here are the specs:
RP38A 49,199 Single Piece Handle Mesh Grille White and Green Scale DC input socket 'Gold' Elac Speaker Silver Tone Knobs Tony |
28th Dec 2013, 12:17 am | #109 | ||||
Dekatron
Join Date: Jul 2007
Location: Evesham, Worcestershire, UK.
Posts: 4,244
|
Re: Calling Hacker Hunter owners!
Hello all,
I am indeed still collecting data, and this thread has been open on a browser tab for many months now, reminding me that I really should update my records. Apologies for the delay Allow me to reply to each of you: Quote:
Quote:
Thanks for this - again, everything checks out perfectly Quote:
Just one question about your set - are you sure about the handle? By this stage, the handles were the 3-piece variety (an extruded aluminium section with steel side sections). Quote:
Thank you for this, which does indeed narrow down the change of grille. However, I have a question about the scale, as by this stage the scale should only have white print. Oh, and what sort of "Hacker" badge does it have? All the best, Mark |
||||
28th Dec 2013, 12:25 am | #110 |
Tetrode
Join Date: Oct 2013
Location: Southampton, Hampshire, UK.
Posts: 50
|
Re: Calling Hacker Hunter owners!
Hi Mark
Green and white scale as stated. The badge is the slanted silver box in the left hand corner of the set. I may have to pick your brains about the lack of FM signal at a later date, when I get a power supply, if that's ok with you? Cheers Tony |
28th Dec 2013, 1:36 am | #111 |
Dekatron
Join Date: Jul 2007
Location: Evesham, Worcestershire, UK.
Posts: 4,244
|
Re: Calling Hacker Hunter owners!
OK - I wasn't really doubting you about the scale, it's just that it's unexpected at that serial number. I wonder if the scale was swapped at some stage of its life? Just a thought: did the serial number come from from the chassis itself, or from a sticker on the base of the set?
It sounds like you have the pressed aluminium badge, which does fit with the age of the set... By all means, you are welcome to pick my brains - if you can find them All the best, Mark |
28th Dec 2013, 6:55 pm | #112 |
Tetrode
Join Date: Oct 2013
Location: Southampton, Hampshire, UK.
Posts: 50
|
Re: Calling Hacker Hunter owners!
Ah, I see...well, yes, modifications will skew the timelines; what's needed is a cluster of consecutive serial numbers around the relevant timelines: maybe I'll get a few more Hunters -for research purposes. . Oh btw, the serial no. is stamped on the chasis.
Cheers Tony Last edited by AC/HL; 28th Dec 2013 at 7:38 pm. Reason: Unnecessary quote of the entire previous post removed |
22nd Jan 2014, 4:36 pm | #113 |
Octode
Join Date: Dec 2005
Location: Near Stowmarket, Suffolk, UK.
Posts: 1,962
|
Re: Calling Hacker Hunter owners!
Hi Mark,
I have just dug my Hunter out and cleaned it all up. Details are as follows: Hunter VHF Model No. RP38A 35574 Single piece handle Sheet aluminium mesh grille White and green scale DC input socket Gold Elac 'speaker Silver tone knobs No Royal Warrant Can't believe I left this thing sitting in my to do pile, all those hours of listening I have missed out on, love it!! Need more Hackers now... Josh. |
22nd Jan 2014, 5:19 pm | #114 |
Dekatron
Join Date: Jul 2007
Location: Evesham, Worcestershire, UK.
Posts: 4,244
|
Re: Calling Hacker Hunter owners!
Thanks Josh - better late than never
I note that it's been a while since I posted the updated PDF with the data gathered so far, so here it is... All the best, Mark |
22nd Jan 2014, 8:03 pm | #115 |
Pentode
Join Date: Jul 2008
Location: Nottingham, UK.
Posts: 151
|
Re: Calling Hacker Hunter owners!
Mine's a bit scruffy I'm afraid - it came to me free via freecycle and is on the increasingly long "to do" list.
RP38A S/N 62836 3-piece handle Extruded grille White scale print Has DC input socket Gold Elac speaker Tone control knobs missing |
22nd Jan 2014, 10:25 pm | #116 |
Dekatron
Join Date: Jul 2007
Location: Evesham, Worcestershire, UK.
Posts: 4,244
|
Re: Calling Hacker Hunter owners!
Thanks for those details - your late Hunter fm/am is not quite the latest, and would have had the original silver tone control knobs. Good luck sourcing replacements - I'm afraid I'm not aware of them being used on other sets, so I guess you'll have to find something that fits the shafts without looking too incongruous. Perhaps an add in the "wanted" section might help
All the best, Mark |
23rd Jan 2014, 10:56 am | #117 |
Pentode
Join Date: Jul 2008
Location: Nottingham, UK.
Posts: 151
|
Re: Calling Hacker Hunter owners!
Thanks for the tips, Mark. Unfortunately the set was dropped by the previous owner, breaking open the cabinet which will need fixing before I do anything else with it. Thankfully the speaker and the circuit boards don't appear to have been damaged.
|
23rd Jan 2014, 11:44 am | #118 |
Triode
Join Date: Apr 2006
Location: Church Gresley ,nr Burton upon Trent, Staffordshire, UK.
Posts: 30
|
Re: Calling Hacker Hunter owners!
Mine is a bit rough
RP38A SERIAL 68208 Handle 3 piece Grill Extruded aluminium badge top left hand corner Scale Black with white DC input yes Loudspeaker Gold Elac Tone Knobs black with silver trim There is a date on the back of main pcb 12/1/76 on a small sticker
__________________
Paranoia is a simile of security ! |
23rd Jan 2014, 12:39 pm | #119 |
Dekatron
Join Date: Jul 2007
Location: Evesham, Worcestershire, UK.
Posts: 4,244
|
Re: Calling Hacker Hunter owners!
Thanks for that, Bob. The date is useful, and fits in with other data already collected. Funnily enough, we have 68206 on record - practically brothers
|
29th Jan 2014, 10:41 pm | #120 |
Triode
Join Date: Mar 2009
Location: Exeter, Devon, UK.
Posts: 36
|
Re: Calling Hacker Hunter owners!
In daily use as bedside radio.
RP38 VHF hunter, black rexine covered case. S/N 11995 Single piece aluminium handle with black rexine strip along the middle. Sheet aluminium mesh grille. Scale print white. No DC input. Elac grey frame speaker. Silver tone control. October 1969 capacitor C20. |