|
|
|
|
|||||||
| Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment. |
 |
|
|
Thread Tools |
27th Jan 2022, 10:43 am
|
#1 |
|
Diode
Join Date: Mar 2010
Location: Tilburg, Netherlands
Posts: 6
|
T1154 Original PSU details - info request
I'm currently trying to setup my dynamotor as close as possible to the original PSU. Bought this dynamotor years ago and recently checked it and it spins when 24v is applied.
Before continuing I would like to find out how to connect this dynamotor correctly (see attachment), but some details are missing and I don't have detailed photos of the original setup. When applying 24v volt to the rotor everything works, but I still have 2 unassigned connections available which are not clear to me. Any help is very much appreciated  Kind regards |
|
|
27th Jan 2022, 11:58 am
|
#2 |
|
Nonode
Join Date: May 2007
Location: Preston, Lancashire, UK.
Posts: 2,511
|
Re: T1154 Original PSU details - info request
The attached pdf might help.
Andy |
|
|
29th Jan 2022, 9:27 am
|
#3 |
|
Diode
Join Date: Mar 2010
Location: Tilburg, Netherlands
Posts: 6
|
Re: T1154 Original PSU details - info request
Andy,
This definitely helps. Didn't have this manual yet. Let's see if it answers my questions after reading Thanks for sharing! |
|
|
|
30th Jan 2022, 8:27 pm
|
#4 |
|
Diode
Join Date: Mar 2010
Location: Tilburg, Netherlands
Posts: 6
|
Re: T1154 Original PSU details - info request
Although this is providing much more detail than I had before, I still looking for a close up photo or precise wiring diagram for what I indicate as the stator winding (< 0,5 ohm).
24v/0.5ohm = more than the 16A running current |
|
|
