|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
11th Nov 2015, 8:01 pm | #1 |
Pentode
Join Date: Oct 2010
Location: Fareham, Hampshire, UK.
Posts: 112
|
Marconi TF2600 Sensitive Valve Voltmeter
Hi
I purchased one of these at the bring and buy stall at Kempton Park on Sunday. One of the high spec resistors had gone open circuit and this has been replaced with one that is pretty close. The results on all the ranges which I can test (my sine wave generator only goes up to 6Vrms) are quite promising. I have the manual, but I understand there is is secondary manual that which gives details of how to set up and calibrate it, has anyone go a copy of this ? Thanks Richard |
11th Nov 2015, 9:37 pm | #2 |
Octode
Join Date: Nov 2010
Location: Ross-on-Wye, Herefordshire, UK.
Posts: 1,652
|
Re: Marconi TF2600 Sensitive Valve Voltmeter
Richard
well I have a couple of manuals, one with 9 pages and another with 23. The 9 page one gives a schematic, layout and parts list, but no cal info. The 23 page one is reference EB2600, but that also has no cal infobut does have a section on "realignment". You are welcome to either of them. Richard |
12th Nov 2015, 11:12 am | #3 |
Pentode
Join Date: Oct 2010
Location: Fareham, Hampshire, UK.
Posts: 112
|
Re: Marconi TF2600 Sensitive Valve Voltmeter
Hi Richard
Thanks, PM sent Cheers Richard |
12th Nov 2015, 8:23 pm | #4 |
Pentode
Join Date: Oct 2010
Location: Fareham, Hampshire, UK.
Posts: 112
|
Re: Marconi TF2600 Sensitive Valve Voltmeter
Hi Richard
Thanks for the manual, I wll let you kow how I get on Cheers Richard |