UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment

Notices

Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Reply
 
Thread Tools
Old 6th Apr 2019, 10:07 am   #21
The Philpott
Octode
 
Join Date: Aug 2016
Location: Colchester, Essex, UK.
Posts: 1,772
Default Re: How to solder

5/32 Whit. Noted, thanks Chris! Perhaps it's time for a pre-emptive strike with tiny smear of copper grease before it becomes a problem. Dave
The Philpott is online now   Reply With Quote
Old 6th Apr 2019, 10:52 am   #22
Herald1360
Dekatron
 
Herald1360's Avatar
 
Join Date: Feb 2007
Location: Leominster, Herefordshire, UK.
Posts: 13,205
Default Re: How to solder

I don't think the grubscrew was 5/32 BSW, the Meccano screw was, ISTR, graunched into the stripped threads of its hole. It was occasionally a nuisance in tight corners of a chassis!

The original thread may have been 6-32 UNC. Maybe the owner of the pristine one could check?

Edit: I see that's you.....

You can make a stand just from bent ally but like a lot of things it's only worth doing for the sake of it with things like this:

https://www.ebay.co.uk/itm/SOLDERING...edirect=mobile

available.
__________________
....__________
....|____||__|__\_____
.=.| _---\__|__|_---_|.
.........O..Chris....O

Last edited by Herald1360; 6th Apr 2019 at 10:59 am.
Herald1360 is offline   Reply With Quote
Old 6th Apr 2019, 1:55 pm   #23
merlinmaxwell
Dekatron
 
merlinmaxwell's Avatar
 
Join Date: Jul 2008
Location: Maidenhead, Berkshire, UK.
Posts: 8,376
Default Re: How to solder

I was taught to solder three times, once by my dad when I was six, second time at the PYE training school and finally by the "ladies on the line" at PYE TVT, they really knew how!
__________________
Cats have staff, it's dogs that have owners.
merlinmaxwell is offline   Reply With Quote
Old 7th Apr 2019, 1:56 am   #24
Chris55000
Heptode
 
Join Date: Aug 2007
Location: Walsall Wood, Aldridge, Walsall, UK.
Posts: 664
Default Re: How to solder

Hi!

I got my soldering tuition from my Dad when I was 12, and yes I've spent the first thirty years fixings using Antex, Remploy and DeeGee irons as well!

Apart from the nuisance of needing a second iron to replace the element in the first one, the biggest bugbear I had with Antex's was the later yellow versions – the black plastic round the heater element assemblies used to crumble away leaving a very hot and dangerously flopping about element and bit end!

I didn't twig about mains leakage from irons in my early days of servicing, but that certainly explained why so few of the radios and amplifiers using germanium transistors didn't oblige me after fault–finding everything else – the mains–leakage had permanently destroyed the characteristics of the transistors!

(I used to get mixer–oscillator stages that refused to oscillate, amplifier stages with hardly any gain and o/p stages that were far too inclined to collector–current runaway!)

Since going into industrials full time twenty years ago with high–quality low–voltage Weller irons with accurate temp. control and proper ESD precautions, my casualty rate with soldering semiconductors has dropped to virtually near zero!

Chris Williams
__________________
It's an enigma, that's what it is! This thing's not fixed because it doesn't want to be fixed!
Chris55000 is offline   Reply With Quote
Old 12th Jul 2019, 7:46 am   #25
suebutcher
Heptode
 
suebutcher's Avatar
 
Join Date: Jul 2012
Location: Daylesford, Victoria, Australia
Posts: 522
Default Re: How to solder

Quote:
Originally Posted by barrymagrec View Post

Leevers used to use Adcola irons that suffered from the same problem - the machine shop chaps made a special jig to hold the element so that the bit could be drilled out on a pillar drill.
My Dad always bought Adcola irons, and that was the big problem with them until they changed the barrel to Metric sizes and added a nickel shim sleeve to stop the tip freezing in place. The trouble was, going Metric rendered the old "L" Series and "M" Series instantly obsolete because the new tips wouldn't fit the old irons and they stopped making the Imperial sized tips on the introduction of the new irons. It needn't have happened if they'd just made the shim sleeves a tenth of a millimetre thicker. Of course they sold more irons that way, but I hated them for it!

Did you have the "M" Series irons in Britain?
__________________
The Waves That Rule Britannia
suebutcher is offline   Reply With Quote
Old 12th Jul 2019, 10:27 am   #26
BRASSBITS
Pentode
 
Join Date: Dec 2018
Location: Sheffield, South Yorkshire, UK.
Posts: 125
Default Re: How to solder

Quote:
Originally Posted by thermionic View Post
There was also the S R. Brewster soldering iron which looked very much like the Antex, but usually had a red handle.

Brewsters were also based in Plymouth, so Iím wondering if they were in fact made by Antex?


SimonT .
I still use one dark blue, I have often thought if they were made by antex
BRASSBITS is online now   Reply With Quote
Old Today, 9:47 am   #27
suebutcher
Heptode
 
suebutcher's Avatar
 
Join Date: Jul 2012
Location: Daylesford, Victoria, Australia
Posts: 522
Default Re: How to solder

I case they weren't sold in the UK, here is a 1960s Australian Adcola M Series M64 with a lovely red Bakelite handle, and its 1973 Metric replacement, the S50. M Series irons are now very hard to find in working order despite the large numbers made for Commonwealth Government departments, the post office, and the military.
Attached Thumbnails
Click image for larger version

Name:	AusAdcola.jpg
Views:	17
Size:	39.9 KB
ID:	186782  
__________________
The Waves That Rule Britannia
suebutcher is offline   Reply With Quote
Old Today, 1:07 pm   #28
barrymagrec
Heptode
 
Join Date: Dec 2017
Location: Morden, Surrey, UK.
Posts: 503
Default Re: How to solder

Quote:
Originally Posted by suebutcher View Post
I case they weren't sold in the UK, here is a 1960s Australian Adcola M Series M64 with a lovely red Bakelite handle, and its 1973 Metric replacement, the S50. M Series irons are now very hard to find in working order despite the large numbers made for Commonwealth Government departments, the post office, and the military.
The Adcola irons that Leevers used and that my Dad had from the early fifties had a brown bakelite handle with a Tufnol tube arrangement. I don`t remember a model number, just 25 watt although a very late one in similar but smaller style was 15 watts.

Leevers Rich stopped using them circa 1971,I think my Dad`s just died and he had a Weller by then.
barrymagrec is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 3:00 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2019, Paul Stenning.