The Thanks Thread - Page 115 - UK Vintage Radio Repair and Restoration Discussion Forum

knobtwiddler · 7th Oct 2025, 12:50 pm

Thank you to Qualityten for the VTVM (it was triple packed! I've had bad luck with MC meters in the post lately, so this one compensated for it!)

turretslug · 31st Oct 2025, 12:04 pm

Thanks to Rob (CambridgeWorks) for the very well packed and prompt arrival of chokes and valves.

Mikey66 · 3rd Nov 2025, 5:16 am

A big thank you to Graham aka SunSPARC for the 9600 & the 2 CRT's. They will give my Thorn 9600 & my 2000 new leases of life.

Also a thank you for Nick 1100man for re-homing two of my Thorn 9000 sets.

It was great to meet you both yesterday

Miguel Lopez · 11th Nov 2025, 4:14 pm

A million thanks to my Friends Andy Wallace (aka. Diabolical Artífice) and Mike (aka VT_FUSE) for sending me a lot of stuff that Will be very useful for my projects and to have some power and work capability during blackouts

Thank you very much!!!!

DMcMahon · 15th Nov 2025, 2:04 pm

A big thankyou to Mike (Cobaltblue) for the various Grundig Technical Bulletins, that have just arrived, it was very good of Mike to provide these FOC, there is lots of interesting reading.

David

mervyn · 15th Nov 2025, 9:03 pm

A very big thank you for Joshward for the KB transformer.

very kind of you

regards

Merv

thermionic · 20th Nov 2025, 7:12 pm

Huge thanks to Ed Dinning for offering and posting a nice box of assorted convergence, A1, focus and various other Pot & Presets.

They will be very useful in servicing mine & other peoples vintage CRT colour sets.

SimonT.

mole42uk · 23rd Nov 2025, 4:40 pm

Thank you Michael (red16v) for the 5” tape spools.

Philco-Pete · 1st Dec 2025, 8:37 pm

Grateful thanks to Steve (kingbeau) for the Peak ESR meter; it will be very useful!
Pete

Trevor · 2nd Dec 2025, 7:09 pm

Thanks to all the contributor's who have shared information and schematics I have just repaired a Farnell PSU with the assistance of data that was posted on our website

af024 · 5th Dec 2025, 3:57 pm

I just wanted to drop a quick thank you to CambridgeWorks for a great selection of useful BSR TD2/TD10 bits and bobs. It was all expertly packaged and delivered promptly and safely. It'll certainly keep me amused for ages. Many thanks!

bobhowe · 5th Dec 2025, 7:10 pm

Thanks Ed for winding me a 2 Volt 7 Amp transformer for my next project kind regards Bob

electronicskip · Today, 11:28 am

Big thanks to Vinylspinner for holding onto the AR88 and bringing it to RWB for me.

7th Oct 2025, 12:50 pm	#2281
knobtwiddler Octode Join Date: Mar 2016 Location: London, UK. Posts: 1,391	Re: The Thanks Thread Thank you to Qualityten for the VTVM (it was triple packed! I've had bad luck with MC meters in the post lately, so this one compensated for it!)

31st Oct 2025, 12:04 pm	#2282
turretslug Dekatron Join Date: Nov 2011 Location: Cambridgeshire, UK. Posts: 4,757	Re: The Thanks Thread Thanks to Rob (CambridgeWorks) for the very well packed and prompt arrival of chokes and valves.

3rd Nov 2025, 5:16 am	#2283
Mikey66 Hexode Join Date: Dec 2008 Location: Swinton, Manchester, UK. Posts: 327	Re: The Thanks Thread A big thank you to Graham aka SunSPARC for the 9600 & the 2 CRT's. They will give my Thorn 9600 & my 2000 new leases of life. Also a thank you for Nick 1100man for re-homing two of my Thorn 9000 sets. It was great to meet you both yesterday __________________ Regards Mike C

11th Nov 2025, 4:14 pm	#2284
Miguel Lopez Heptode Join Date: Dec 2011 Location: Mayabeque, Cuba Posts: 624	Re: The Thanks Thread A million thanks to my Friends Andy Wallace (aka. Diabolical Artífice) and Mike (aka VT_FUSE) for sending me a lot of stuff that Will be very useful for my projects and to have some power and work capability during blackouts Thank you very much!!!! Attached Thumbnails __________________ When electrons move, things happen. There's nothing you can do that can't be done.

15th Nov 2025, 2:04 pm	#2285
DMcMahon Dekatron Join Date: Apr 2019 Location: Worthing, West Sussex, UK. Posts: 7,231	Re: The Thanks Thread A big thankyou to Mike (Cobaltblue) for the various Grundig Technical Bulletins, that have just arrived, it was very good of Mike to provide these FOC, there is lots of interesting reading. David

15th Nov 2025, 9:03 pm	#2286
mervyn Hexode Join Date: Mar 2005 Location: Whitfield, Dover, Kent, UK. Posts: 416	Re: The Thanks Thread A very big thank you for Joshward for the KB transformer. very kind of you regards Merv

20th Nov 2025, 7:12 pm	#2287
thermionic Octode Join Date: Apr 2003 Location: Cornwall, UK. Posts: 1,072	Re: The Thanks Thread Huge thanks to Ed Dinning for offering and posting a nice box of assorted convergence, A1, focus and various other Pot & Presets. They will be very useful in servicing mine & other peoples vintage CRT colour sets. SimonT. __________________ Www.vintagetechhospital.co.uk

23rd Nov 2025, 4:40 pm	#2288
mole42uk Nonode Join Date: Aug 2010 Location: Resolven, Wales; and Bristol, England Posts: 2,727	Re: The Thanks Thread Thank you Michael (red16v) for the 5” tape spools. __________________ Richard Index: recursive loop: see recursive loop

1st Dec 2025, 8:37 pm	#2289
Philco-Pete Pentode Join Date: Oct 2009 Location: Chesham, Bucks. UK. Posts: 101	Re: The Thanks Thread Grateful thanks to Steve (kingbeau) for the Peak ESR meter; it will be very useful! Pete

2nd Dec 2025, 7:09 pm	#2290
Trevor Octode Join Date: Aug 2006 Location: Stoke-on-Trent, Staffordshire, UK. Posts: 1,169	Re: The Thanks Thread Thanks to all the contributor's who have shared information and schematics I have just repaired a Farnell PSU with the assistance of data that was posted on our website

5th Dec 2025, 3:57 pm	#2291
af024 Octode Join Date: Jan 2003 Location: Ashby-de-la-Zouch (it's not by the sea) Posts: 1,339	Re: The Thanks Thread I just wanted to drop a quick thank you to CambridgeWorks for a great selection of useful BSR TD2/TD10 bits and bobs. It was all expertly packaged and delivered promptly and safely. It'll certainly keep me amused for ages. Many thanks! __________________ Now where on earth did I remove that from?

5th Dec 2025, 7:10 pm	#2292
bobhowe Heptode Join Date: Jun 2005 Location: Sunderland, Tyne and Wear, UK. Posts: 795	Thanks Ed Dinning Thanks Ed for winding me a 2 Volt 7 Amp transformer for my next project kind regards Bob __________________ BVWS . RSGB Member

Today, 11:28 am	#2293
electronicskip Nonode Join Date: Oct 2010 Location: Gloucester, Glos. UK. Posts: 2,238	Re: The Thanks Thread Big thanks to Vinylspinner for holding onto the AR88 and bringing it to RWB for me. __________________ Oh I've had that for years dear!!