|
Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only. |
|
Thread Tools |
22nd Jul 2007, 4:32 pm | #1 |
Dekatron
Join Date: Sep 2003
Location: Bolton, Greater Manchester, UK.
Posts: 6,644
|
Wet Radios - What to do?
I thought this might be a good idea at the moment, so here goes.
All sets - For goodness sake don't plug them in! If it's a Battery Set, remove the batteries first!! Get a manual for the set if possible. Valve sets - Remove back and all electronics from case. Take the case apart if need be, and put it somewhere safe to dry. Same with the Glass Dial, being careful not to damage it (or damage it further!). You may need to put the back under something to stop it from curling up while drying out. Speakers - Leave to dry out thouroughly. Could take days. Valves - These are waterproof, so they will be OK. The numbers may have gone though, so make a diagram of the set and number where they go. If you can, make paper labels (for now) so you know what goes where. Transformers and IF/RF cans - Like speakers - leave to dry thouroughly. They may be OK, may not. You may need to rewind/replace mains and o/p transformers if the wire insulation has failed. Capacitors - Change them! Variable Caps - Hairdryer them clean, and then shove them in the Dishwasher. Resistors - Look and see. Wiring - Replace any that you think needs it. Don't spare the wire, and you must replace the mains wiring. Let the chassis dry out thouroughy too, but use a brush to make sure it's dry and to remove any debris. Transistor and PCB Sets - as above, but be sure that the PCB Tracks don't come off. Clean every part thourougly, and the smaller Varicaps need time to dry out thouroghly. You should eventually have a kit of parts. Rebuild carefully and bring up on a variac. Anyone got anything more to add here. Cheers, Steve P
__________________
If we've always had it, why is the Car Boot open? You're not sneaking another Old TV in are you...? |
22nd Jul 2007, 5:10 pm | #2 |
Retired Dormant Member
Join Date: May 2007
Location: Runcorn, Cheshire, UK.
Posts: 71
|
Re: Wet Radios - What to do?
Battery transistor sets will probably be OK after a good dry out. At least flood water is fresh - sea water can destroy printed boards and components in no time. Beleive it or not, should I have a marine set in for service where the innards have been exposed to salt water, I actually wash it using the water-based Electrolube Safewash 2000 and warm tap water, then allow to dry fully before seeing if I can rescue it.
Not recommended for a vintage valve set though Pete |
22nd Jul 2007, 6:10 pm | #3 |
Retired Dormant Member
Join Date: May 2007
Location: Runcorn, Cheshire, UK.
Posts: 71
|
Re: Wet Radios - What to do?
Forgot to mention. Bear in mind that floodwater can be contaminated with sewage, so wash hands after handling soiled sets.
The best way to disinfect? When the sun eventually comes out, just place items in full sunlight as the UV radiation kills sewage pathogens. Will also help the drying process. Tuesday looks to be the best (possibly the only) "drying day" this coming week. Pete |
23rd Jul 2007, 12:43 am | #4 | |
Dekatron
Join Date: Jan 2003
Location: Bradford on Avon, Wiltshire, UK.
Posts: 3,310
|
Re: Wet Radios - What to do?
Quote:
Following on in the same vein, I once bought a restored white DAC90A at a boot sale which had survived a house fire, but been soaked by the fire brigade. The tuning scale has had it , but a fan heater directed into the back for about 48 hours dried out most bits, and it does actually work. It's on the "pile".
__________________
"Nothing is as dangerous as being too modern;one is apt to grow old fashioned quite suddenly." |
|
3rd Aug 2007, 8:49 pm | #5 |
Retired Dormant Member
Join Date: Jul 2007
Location: Chatham, Kent, UK.
Posts: 15
|
Re: Wet Radios - What to do?
Airing cuboard might help i once left a digital camera out overnight in the rain and it ok 3 days later.
|
3rd Aug 2007, 9:38 pm | #6 |
Nonode
Join Date: Jan 2004
Location: 1966-1976 Coverack in Cornwall and Helston Cornwall. 1976-present Bristol/Bath area.
Posts: 2,967
|
Re: Wet Radios - What to do?
I've noticed over the years that even freshwater damage from either plumbing or roof leaks can cause a lot of corrosive damage. I looked at someones old Bush TR130 which had got soaked when they had a burst pipe in the loft. I was totally surprised at the amount of corrosion I found almost like the set had been attacked by sea water. It makes you wonder what comes out of the taps!
__________________
Simon BVWS member Last edited by Hybrid tellies; 3rd Aug 2007 at 9:47 pm. |
4th Aug 2007, 1:26 pm | #7 |
Retired Dormant Member
Join Date: Apr 2003
Location: Blackpool, Lancashire, UK.
Posts: 4,061
|
Re: Wet Radios - What to do?
|
4th Aug 2007, 2:43 pm | #8 |
Retired Dormant Member
Join Date: Oct 2004
Location: Bristol, UK.
Posts: 837
|
Re: Wet Radios - What to do?
If water has come through a ceiling, it will have picked up corrosive salts from plaster. Plastering tools rust up badly if you don't clean them well.
Clean rainwater from a butt is good for rinsing things off. Pete. |