Panasonic PBX KX-730810BE - UK Vintage Radio Repair and Restoration Discussion Forum

oldmoley1 · 6th Nov 2014, 6:48 pm

Just picked the above PBX up to run a few more of my classic phones from. All is working well, but I would like the phones to ring using the double cadence, rather than the single extension-to-extension ring, which seems to be the factory default. I've scoured the programming manual but can find no reference to this at all. Is there a way to re-programme the cadence, and if so, does anyone know the programming code/procedure? I have a KA-TX624 which allows this change to be made, but the programming code for this unit (Code 115) doesn't work for the 308.

Any ideas folks?

Pellseinydd · 6th Nov 2014, 8:15 pm

Wasn't an option on the 'first generation' KXT206/308/616 systems - see http://www.htcnetworks.co.uk/308%20I...n%20manual.PDF for the Installation/Programming manual. for the KXT308 Introduced for the A624 and later analogue systems.

Ian

Oldcodger · 7th Nov 2014, 1:11 am

As said. can't lay my hands on my 308 factory course manual, but from memory, there were two ringing systems, internal to internal and external to internal and this was not subject to change.

6th Nov 2014, 6:48 pm	#1
oldmoley1 Tetrode Join Date: Apr 2014 Location: Northampton, Northants, UK. Posts: 84	Panasonic PBX KX-730810BE Just picked the above PBX up to run a few more of my classic phones from. All is working well, but I would like the phones to ring using the double cadence, rather than the single extension-to-extension ring, which seems to be the factory default. I've scoured the programming manual but can find no reference to this at all. Is there a way to re-programme the cadence, and if so, does anyone know the programming code/procedure? I have a KA-TX624 which allows this change to be made, but the programming code for this unit (Code 115) doesn't work for the 308. Any ideas folks?

6th Nov 2014, 8:15 pm	#2
Pellseinydd Heptode Join Date: Jul 2007 Location: Flintshire, UK. Posts: 707	Re: Panasonic pbx kx-730810be Wasn't an option on the 'first generation' KXT206/308/616 systems - see http://www.htcnetworks.co.uk/308%20I...n%20manual.PDF for the Installation/Programming manual. for the KXT308 Introduced for the A624 and later analogue systems. Ian

7th Nov 2014, 1:11 am	#3
Oldcodger Nonode Join Date: Oct 2014 Location: West Midlands, UK. Posts: 2,181	Re: Panasonic PBX KX-730810BE As said. can't lay my hands on my 308 factory course manual, but from memory, there were two ringing systems, internal to internal and external to internal and this was not subject to change.