|
Hints, Tips and Solutions (Do NOT post requests for help here) If you have any useful general hints and tips for vintage technology repair and restoration, please share them here. PLEASE DO NOT POST REQUESTS FOR HELP HERE! |
|
Thread Tools |
10th Jul 2006, 7:00 pm | #1 |
Nonode
Join Date: Jun 2004
Location: Norwich, Norfolk, UK.
Posts: 2,543
|
Bush VTR103 push button repair
I made some waterslide transfers for my Bush VTR103. I'm not entirely happy with the fix because the edges of the transfer is visable and the colours aren't right (can't print gold)... but it's better than nothing.
I've attached a photo of the finish result and the two images should you decide to make your own. Make sure each image is 5cm X 2cm before printing and they should match the original recesses (well they did on mine) Regards David |
10th Jul 2006, 8:38 pm | #2 |
Heptode
Join Date: May 2004
Location: Ellington, Northumberland, UK.
Posts: 815
|
Re: Bush VTR103 push button repair
Looks pretty darned good to my critical eye.
__________________
John. |
10th Jul 2006, 10:14 pm | #3 |
Octode
Join Date: Jan 2003
Location: Ashby-de-la-Zouch (it's not by the sea)
Posts: 1,254
|
Re: Bush VTR103 push button repair
Well done Dave. I did a bad thing not so long ago and tried to fill the lettering in on mine using a gold pen stick that I got from the local boy racer car shop (boy did I feel out of place there). It started to attack the plastic!! Was I mad with myself. You may just have the fix I need there. Excellent. Thanks for your posting.
Cheers, Andy
__________________
Now where on earth did I remove that from? |