UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Sets, Parts and Service Information Wanted (private buyers only, no swaps)

Notices

Sets, Parts and Service Information Wanted (private buyers only, no swaps) If you need help obtaining components, sets or equipment, post a message here. Private buyers only - no traders. No swaps.

Reply
 
Thread Tools
Old 25th Mar 2020, 1:26 pm   #21
steve55
Diode
 
Join Date: Mar 2020
Location: Warrington, Cheshire, UK.
Posts: 7
Default Re: Tektronix T912

Yes that's how it fits together Andy good to hear your keeping well . Ive recently purchased a lathe but that's another project that's not up and running yet, as i am in the process of concreting my workshop floor . which also has just been put on hold due to no deliveries from concrete supplier .
I've still got plenty to keep me busy though .
I will try the wanted section re the 3D printer option .
thanks
steve
steve55 is offline   Reply With Quote
Old 26th Mar 2020, 7:45 am   #22
Diabolical Artificer
Dekatron
 
Diabolical Artificer's Avatar
 
Join Date: Jul 2009
Location: Sleaford, Lincs. UK.
Posts: 4,995
Default Re: Tektronix T912

What lathe? Bummer, I suppose mixing by hand (with a mixer) is out of the question, lots of kids with nothing to do at the moment too, at a distance of coarse, still, most youths are rubbish at grafting, the ones i had owt to with in the past I'd end up doing the job myself.

Andy.
__________________
Curiosity hasn't killed this cat...so far.
Diabolical Artificer is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 6:40 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.