UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Radio (domestic)

Notices

Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only.

Reply
 
Thread Tools
Old 10th Nov 2019, 11:05 pm   #141
David G4EBT
Dekatron
 
David G4EBT's Avatar
 
Join Date: Feb 2003
Location: Cottingham, East Yorkshire, UK.
Posts: 3,757
Default Re: Kolster-Brandes MR10

Thanks for the clarification Lawrence.
__________________
David.
BVWS Member.
G-QRP Club member 1339.
David G4EBT is offline   Reply With Quote
Old 11th Nov 2019, 7:25 am   #142
crackle
Dekatron
 
crackle's Avatar
 
Join Date: Mar 2011
Location: Basildon, Essex, UK.
Posts: 3,146
Default Re: Kolster-Brandes MR10

Thanks Lawrence you answered my question whilst I was still struggling to ask it.

Mike
__________________
BVWS Member
The KB Museum

My collection in the Radio Museum
crackle is offline   Reply With Quote
Old 11th Nov 2019, 11:13 am   #143
ms660
Dekatron
 
ms660's Avatar
 
Join Date: Apr 2011
Location: Cornwall, UK.
Posts: 8,361
Default Re: Kolster-Brandes MR10

No problem.

If no second receiver is available, the time honoured method of measuring what's what at the oscillators anode and grid is the way to go as a first port of call.

Lawrence.
ms660 is offline   Reply With Quote
Old 11th Nov 2019, 2:39 pm   #144
DonaldStott
Heptode
 
DonaldStott's Avatar
 
Join Date: Aug 2015
Location: Glasgow, UK.
Posts: 666
Default Re: Kolster-Brandes MR10

All very technical stuff guys and well above my pay grade but I think I'm just about hanging on in there?

The YouTube link below shows the Kolster-Brandes MR10 (at rear) with my Roberts R303 - both on the MW band but MR10 speaker disconnected.

Some interference heard on the Roberts at one particular spot when the MR10 is tuned through the MW band.

Is this what you mean: -

https://youtu.be/a37mgMNXgT8

While I had YouTube open I thought I'd upload another video which hopefully lets you hear the issues I am having with the Tone Control. This is very bright for most of it's rotation then dull and flat - "dead spot" with excessive hum and crackling. Treated with De-Oxit several times but problem getting progressively worse!

The hum in the "dead spot" is much more pronounced in real life!

https://youtu.be/bzU6QzLeL6A
__________________
BVWS Member
DonaldStott is offline   Reply With Quote
Old 11th Nov 2019, 3:37 pm   #145
crackle
Dekatron
 
crackle's Avatar
 
Join Date: Mar 2011
Location: Basildon, Essex, UK.
Posts: 3,146
Default Re: Kolster-Brandes MR10

I am assuming you changed C39 (trader).
It looks like you may need to remove the tone control and dismantle to check for and clean away excessive dirt or corrosion on the metal wipers and tracks.
Be careful about not scraping the carbon track with anything hard, the layer of carbon is very delicate and thin. I normally reassemble with a little smear of grease on the metal and carbon tracks.
If that does not fix it then a new 220k with double pole switch may be needed.

Mike
__________________
BVWS Member
The KB Museum

My collection in the Radio Museum
crackle is offline   Reply With Quote
Old 11th Nov 2019, 5:38 pm   #146
DonaldStott
Heptode
 
DonaldStott's Avatar
 
Join Date: Aug 2015
Location: Glasgow, UK.
Posts: 666
Default Re: Kolster-Brandes MR10

Quote:
Originally Posted by David G4EBT View Post
As to 'not getting anywhere with the Nostalgair tests and your signal tracer', in fact you were, because the tests showed that the oscillator wasn't working, just as if - for example - you put an Ohmmeter across a fuse and 'get no reading', it proves that the fuse has blown.
Apologies David, poor wording on my part as the tests did indeed show that the oscillator wasn't working - a crucial step in finding where the actual problem lay i.e. a poor solder joint on the underside of V2. Nostalgia Air: Signal Tracing is a very good resource so thanks again for the link.

Quote:
Originally Posted by crackle View Post
I am assuming you changed C39 (trader).
I know it's been a long Thread but way back in Post #2 I mentioned: -

"Next Step is to replace both C38 and C39 A.F. coupling capacitors - before our first live test, with the lamp limiter of course.

The Service Sheet shows C39 as 0.02μF although what has been fitted in my set is 0.001μF. On the assumption that Kolster-Brandes made this change for good reasons (?) I'm going to replace like for like ..."


Both C38, C39 (Trader) and a number of Hunts Mouldseals and waxy paper capacitors have all been replaced - like for like.

I note what you write about removing, dismantling and cleaning the Tone control - something I have been avoiding but now know I have no real choice.

I have looked around for an appropriate 250k with double pole switch but can't seem to find an exact match, specifically in relation to the d-shaped metal spindle.

The KB Museum Service Data sheet lists this as: -

Component: Potentiometer 1/4 M.ohm and D.P.S.
Part No. : 80670 / 5
Price : 8/-

I make that 40 New Pence as we used to say back in 1971!
__________________
BVWS Member
DonaldStott is offline   Reply With Quote
Old 11th Nov 2019, 7:04 pm   #147
David G4EBT
Dekatron
 
David G4EBT's Avatar
 
Join Date: Feb 2003
Location: Cottingham, East Yorkshire, UK.
Posts: 3,757
Default Re: Kolster-Brandes MR10

You won't fine a current production 250K potentiometer as for a long time, the standard value has been 220K, which would be fine, (in the same way that 470K has superceded 500K).The next value above 250K would be 270K, but you're unlikely to find one of those either. Most suppliers tend go from 100K to 220K, 470K, then 1 Meg, 2 Meg.

A current production standard pot would have a 50mm long x 6mm diam Delrin (plastic) shaft with no flat, whereas I guess your MR10 one has a metal shaft and will be 1/4" diam (6.4mm) and with a flat. A 1/4" knob will fit a 6mm shaft but will be very slightly eccentric, though on your radio, as the tone control and combined on/off switch are mounted on the side, I doubt that slight eccentricity would be noticeable. That said, I think your knobs fit with a spring clip rather than a grub screw, so that could be problematical on a 6mm shaft.

You can however obtain a new switched pot made to order from Blore Edwards with a 1/4" metal shaft on request and if you wished, could ask if they could do a 250K linear track, but I doubt it, and as I said, 220K would be fine. Being a tone control, it will almost certainly have a linear track, but you can make sure by setting it to the middle of its travel and checking with an Ohm-Meter from the centre tag to each end, to check that it reads approximately 125K either side of the centre tag.

If you got to this link at Blore Edwards, you'll see that they state that their standard Type 45 potentiometer is supplied with a 6x50mm (two inch) plain Delrin spindle, but that metal spindles are available on request and are also available in both metric and imperial diameters. You'd have to ask them to add a flat to the shaft if you want to avoid having to file a flat on it yourself.

The person to ask for is Brett, who is very helpful, as others will testify:

https://www.blore-ed.com/series45potentiometers

Phone No: 01685 882 043

The simplest and cheapest option would be a 220K switched pot with a 6mm diam x 50mm Delrin shaft from Bowood, but as I said, the push-on knob might be an issue, and the pot shaft won't have a flat on it.

https://www.bowood-electronics.co.uk...switched-p-651

Hope that may help.
__________________
David.
BVWS Member.
G-QRP Club member 1339.
David G4EBT is offline   Reply With Quote
Old 11th Nov 2019, 7:56 pm   #148
ms660
Dekatron
 
ms660's Avatar
 
Join Date: Apr 2011
Location: Cornwall, UK.
Posts: 8,361
Default Re: Kolster-Brandes MR10

Quote:
Originally Posted by DonaldStott View Post
All very technical stuff guys and well above my pay grade but I think I'm just about hanging on in there?

The YouTube link below shows the Kolster-Brandes MR10 (at rear) with my Roberts R303 - both on the MW band but MR10 speaker disconnected.

Some interference heard on the Roberts at one particular spot when the MR10 is tuned through the MW band.

Is this what you mean: -

https://youtu.be/a37mgMNXgT8
That's basically it when using another receiver to check if the oscillator in the receiver under test is working, what you are getting there is the oscillator in the KB mixing with the signal frequency that the Roberts is tuned to, that produces an audible "beat" frequency as you tune through, it's frequency varying according to the difference frequency between those two signals, basically that's how the IF is obtained in a superhet receiver, the difference being that the difference frequency is much higher, in the case of the KB it's given as 422kHz.

The oscillator frequency should always be higher than the frequency of the signal being received and the difference between the signal frequency and the oscillator frequency should always be the IF frequency, so to that end here's the maths behind it, it's not complicated.

Suppose you tune the receiver to a station you want to listen to and let's say the station is transmitting on a frequency of 1,000kHz, the oscillator frequency needs to be higher than that by an amount that equals the IF, we know that the IF is 422kHz therefore the oscillator frequency should be at 1,000+422 which equals 1,422kHz, that's it in essence and to prove the point, when those two frequencies are fed into the mixer the difference frequency produced at the anode will be 1,422kHz (the oscillator frequency) minus 1,000kHz (the signal frequency) That results in a frequency of 422kHz....Voila..the IF.

From that you can see that the signal tuning and the oscillator tuning should be tuned to maintain that difference frequency, the IF.

In practice they never track together exactly across the tuning range but near enough not to cause any great concern if the receiver is up to spec.

That's it, not as technical or complicated as might be first assumed.

Keep at it, learn the basic theory and apply to practice, first principles won't let you down.

Lawrence
ms660 is offline   Reply With Quote
Old 11th Nov 2019, 8:04 pm   #149
crackle
Dekatron
 
crackle's Avatar
 
Join Date: Mar 2011
Location: Basildon, Essex, UK.
Posts: 3,146
Default Re: Kolster-Brandes MR10

The plastic shaft is very easy to cut to length and if the flat is filed carefully, with just a fine flat, the knob should push onto it and grip the small flat sufficiently. If not then make the flat bigger and pack out the flat with a thin piece of hard plastic and try again.
Alternatively, am I right in thinking the knobs are not the original ones, maybe keep the new shaft long and fit a new knob with a grub screw to the new pot shaft.

But you may be able to clean up and get the existing pot working nicely.

One point I have noticed about a radio with a non working oscillator, you can sometimes use another radio to get the faulty radio to work.
By tuning through the dial on the good working radio you may hear stations being received on the faulty radio.
It is rather spooky when you adjust one radio and the other starts to receive a station.

This can be even more noticeable if you are using an RF frequency generator. As you sweep the frequency generator across the MW frequencies + the IF frequency the radio should start to work.

Mike
__________________
BVWS Member
The KB Museum

My collection in the Radio Museum

Last edited by crackle; 11th Nov 2019 at 8:13 pm.
crackle is offline   Reply With Quote
Old 11th Nov 2019, 10:41 pm   #150
DonaldStott
Heptode
 
DonaldStott's Avatar
 
Join Date: Aug 2015
Location: Glasgow, UK.
Posts: 666
Default Re: Kolster-Brandes MR10

Quote:
Originally Posted by crackle View Post
But you may be able to clean up and get the existing pot working nicely.
Can't help but feel that any attempt to remove, dismantle and clean the Tone control is a one way street to a new potentiometer? I'll contact Blore Edwards regarding a new pot before attempting anything too ambitious!

I'm still hopeful that I can source some original knobs or suitable alternatives - surely there are many Forum members with boxes of old knobs kicking about their workshops?

Lots of chatter about making such items using a 3D printer but it's probably early days for such technology in this context.
__________________
BVWS Member
DonaldStott is offline   Reply With Quote
Old 12th Nov 2019, 1:35 pm   #151
regenfreak
Pentode
 
Join Date: Nov 2018
Location: London SW16, UK.
Posts: 130
Default Re: Kolster-Brandes MR10

Quote:
One point I have noticed about a radio with a non working oscillator, you can sometimes use another radio to get the faulty radio to work.
By tuning through the dial on the good working radio you may hear stations being received on the faulty radio.
It is rather spooky when you adjust one radio and the other starts to receive a station.
Since most oscillator coils are not shielded in valve radios, I guess the leakage RF oscillator signal of the working radio must be coupled to the antenna of the defective radio and then to the RF input grid of the mixer.
regenfreak is offline   Reply With Quote
Old 12th Nov 2019, 3:11 pm   #152
crackle
Dekatron
 
crackle's Avatar
 
Join Date: Mar 2011
Location: Basildon, Essex, UK.
Posts: 3,146
Default Re: Kolster-Brandes MR10

Nothing to loose by trying, only experience and skill to be learned.
Mike
__________________
BVWS Member
The KB Museum

My collection in the Radio Museum
crackle is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 3:19 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2019, Paul Stenning.