|
Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment. |
|
Thread Tools |
28th Sep 2019, 2:28 pm | #1 |
Tetrode
Join Date: Sep 2015
Location: Walsall, West Midlands, UK.
Posts: 85
|
Help identifying odd connector
Hi,
I'm hoping somebody might be able to identify the type of connector (picture attached) one picture shows the socket, the other picture shows the Male version on the opposite side. I know for sure it is 3/8 size, and that a CB style antenna will physically fit. This connector has separate shield and centre pin though. I'm trying to find an antenna to fit the socket. Or at least an adapter to fit. |
28th Sep 2019, 2:46 pm | #2 |
Nonode
Join Date: Dec 2012
Location: Stockport, Greater Manchester, UK.
Posts: 2,117
|
Re: Help identifying odd connector
Is this for a car DAB adaptor?
__________________
- Julian It's good here |
28th Sep 2019, 3:59 pm | #3 |
Tetrode
Join Date: Sep 2015
Location: Walsall, West Midlands, UK.
Posts: 85
|
Re: Help identifying odd connector
No it's for a Rohde & Schwarz Radio Comms Test Set
|
28th Sep 2019, 4:19 pm | #4 |
Heptode
Join Date: Sep 2009
Location: Tonbridge, Kent, UK.
Posts: 687
|
Re: Help identifying odd connector
Used on a lot of CB antennas, the cable side not the antenna side.
|
28th Sep 2019, 4:57 pm | #5 |
Tetrode
Join Date: Sep 2015
Location: Walsall, West Midlands, UK.
Posts: 85
|
Re: Help identifying odd connector
I did try a CB antenna, and it does fit but the CB antenna doesn't have a centre and shield. it shorts out the centre conductor and shield on the socket.
|