|
Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here. |
|
Thread Tools |
1st May 2005, 9:02 pm | #1 |
Hexode
Join Date: Oct 2004
Location: Cheltenham, Gloucestershire, UK.
Posts: 283
|
Bush DAC 90A - getting the wavechange knob off.
Can anyone tell me please how the side-mounted wavechange switch knob comes off on a Bakelite cased Bush DAC 90A so that I can remove the chassis from its casing. Thanks, John.
__________________
Now that's the kind of Long Wave I like ! (Severn Bore near Gloucester) |
1st May 2005, 9:15 pm | #2 |
Dekatron
Join Date: Jan 2005
Location: Oxford, UK.
Posts: 17,864
|
Re: Bush DAC 90A - getting the wavechange knob off.
John, from memory, there should be a screw holding it on, accessible with the back cover removed. Have a look with a torch
|
1st May 2005, 10:17 pm | #4 |
Tetrode
Join Date: Apr 2005
Location: Holmfirth, West Yorkshire, UK.
Posts: 55
|
Re: Bush DAC 90A - getting the wavechange knob off.
Here is one out of the case I am working on. Screw easily visable.
Last edited by Paul Stenning; 2nd May 2005 at 9:28 am. Reason: Removed OT stuff |
2nd May 2005, 7:35 pm | #5 |
Hexode
Join Date: Oct 2004
Location: Cheltenham, Gloucestershire, UK.
Posts: 283
|
Re: Bush DAC 90A - getting the wavechange knob off.
Thanks, all. So simple, but I just didn't spot it ! John.
__________________
Now that's the kind of Long Wave I like ! (Severn Bore near Gloucester) |