UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Radio (domestic)


Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only.

Thread Tools
Old 19th Dec 2018, 2:48 am   #41
Join Date: Sep 2011
Location: Consett, County Durham, UK.
Posts: 112
Default Re: Bush DAC90A sound problem

I am the originator of the two diagrams in the last post. Although this remedy works, it is a real tight squeeze and you therefore need to ensure that none of the connections to the new switch are touching the chassis! I have done this twice now with success on both occasions but it is fiddly.

Gordonc is offline   Reply With Quote
Old 19th Dec 2018, 2:54 am   #42
cernem1alt's Avatar
Join Date: Sep 2017
Location: Dorchester, Dorset, UK.
Posts: 68
Default Re: Bush DAC90A sound problem

I have done this today and can verify that it works, also as I did not require the set to be authentic as possible I removed that chassis bar which is a cause of some space trouble and refashioned a piece of vintage mecano as a case fix bracket. So thanks both for that successful fix.
cernem1alt is offline   Reply With Quote

Thread Tools

All times are GMT +1. The time now is 3:51 am.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.