Useful tuning scale and label scans etc

[crackle]

Bush DAC90A see zip file for high res image

[crackle]

Ultra R906 dial, see zip file for high res images

[ThePillenwerfer]

Ultra U7961 Troubadour.

[frglee21]

Tuner labels and "Caution" labels for a Bush DAC10 chassis.

[frglee21]

This may seem an odd one but the "licence plate" was missing from the inside of the cabinet of my Bush DAC10 so I made this one for completeness.

It's beyond me - and my drawing software - to recreate the logo so I took a scan of the one in my DAC90A. The scanned licence plate has suffered a bit from heat so the bottom of the outer rings is slightly deformed. It does look better when it's printed out.

I covered it with clear adhesive film then mounted it onto a piece of plastic to make it look reasonably authentic.

The actual size is 6.2cms x 1.8cms

If anyone is interested I can add the serial number of their radio to the plate.

Regards, Lee.

[kalee99]

HMV 5213
Scans attached here; Because these are white printed onto plain plate glass I have scanned them two ways. One with white backing as normal and one scan with black backing.
Paul.

[g4aaw pete]

Pye L75 battery portable - reconstructed.

[PJC58-Hythe]

Peto Scott H52 - reconstructed

[PJC58-Hythe]

Sound Sales - Round Dial MW & LW

[ThePillenwerfer]

Bush DAC90 - white version.

- Joe

[ThePillenwerfer]

Bush DAC90a back. The tidying up of this scan was a joint effort by David G4EBT and I.

- Joe

[Boater Sam]

Bush VHF 90 glass here. Do have a cleaned up one too if you need it just PM me.

Sam,

[Boater Sam]

Oops, would be better if I included the file of the scan, sorry.
Bush VHF90 tuning scale scan here. I have a cleaned up high def version too, PM for it please.

Sam

[Boater Sam]

Here are two scans, a cleaned and prepped VHF90 and a scan of the control panel on a Roberts R300.

The Roberts panel probably will fit other models. They tend to get discoloured, this scan can be printed on sticky film to recover the original.
It was very difficult to scan due to the upturned edges spacing the panel away from the scanner glass.

Sam.

[Boater Sam]

I'll try again uploading scans.
Sam.

[Boater Sam]

Scan here of Cossor 500 tuning scale.
I think this is slightly different from the 501.
Boater Sam

[Nymrod121]

Who ate all the Pyes?

This is my attempt at reproducing the badge from inside the lid of a Black Box. I did a 'step & repeat' copy of the original image so that I'd end up with plenty with which to experiment

These turned out quite well on my inkjet - how to translate paper copy into some form of glossy finish that would look OK on the inside of the BB's lid - photo paper? laminating sheet?

Hope it's of use
Best wishes
Guy

[Telefunken Dan]

Here's a dial plate for a C1955 Telefunken Mazurka. I foolishly washed the original and half the letters slipped or fell off (my first time restoring!). Luckily I'd taken decent enough photos to remake a template and got it screen printed locally. Here are the PDF's (reversed for printing onto glass), and for reference the font I used was DIN 1451 Std Engschrift.

[crackle]

Hi
Just in case anybody else is looking for an image of the dial of the Invicta 33 (unlikely but you never know), I have uploaded a PDF of my drawing. It should print out at the correct size.

Mike

[crackle]

Here are 2 dials for the Philips 206A, a colour and a B&W drawing.