|
|
|
|
|||||||
| Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
 |
|
|
Thread Tools |
14th Sep 2023, 12:23 pm
|
#1 |
|
Diode
Join Date: Sep 2023
Location: Edinburgh, Scotland, UK.
Posts: 2
|
SSG1000 GPIB Programming
Hi. I am trying to control a Farnell SSG1000 Signal generator through GPIB. Does anyone here have the manual or GPIB instructions to share with me? I tried to look for it in internet but I did not have luck with that
 . Thank you in advance, John |
|
|
|
17th Sep 2023, 6:59 pm
|
#2 |
|
Octode
Join Date: Dec 2012
Location: Stockport, Greater Manchester, UK.
Posts: 1,892
|
Re: SSG1000 GPIB Programming
There is a separate instruction booklet for GPIB programming - only 7 pages, will scan it
__________________
- Julian It's good here 
|
|
|
|
|
17th Sep 2023, 10:47 pm
|
#3 |
|
Octode
Join Date: Dec 2012
Location: Stockport, Greater Manchester, UK.
Posts: 1,892
|
Re: SSG1000 GPIB Programming
PDF uploaded: this includes Application Notes for programming from a Commodore 4000 Series over GPIB, HP85 Series over GPIB, and programming from HP41C Series using HP-IL
__________________
- Julian It's good here
Last edited by Julesomega; 17th Sep 2023 at 10:55 pm. |
|
|
|
|
18th Sep 2023, 9:49 am
|
#4 |
|
Pentode
Join Date: Sep 2014
Location: Bedford, Bedfordshire, UK.
Posts: 169
|
Re: SSG1000 GPIB Programming
Thanks for posting that Julian. I'm hoping it will also apply to my Farnell PSG1000 sig gen. Not that I use GPIB much but it's nice to have the option.
Ian |
|
|
|
|
18th Sep 2023, 12:28 pm
|
#5 |
|
Diode
Join Date: Sep 2023
Location: Edinburgh, Scotland, UK.
Posts: 2
|
Re: SSG1000 GPIB Programming
Brilliant Julesomega! Thank you very much for sharing.
|
|
|
|
