The Thanks Thread

[DMcMahon]

Thank you to Steve G4WCS for the BM8/2 Meggar, it has come in very useful.

David

[deliverance]

Thanks to frankmcvey for the connector speedy service cheers .

[DMcMahon]

Many thanks to buggies (George) for supply of HV diodes for Solartron scope.

David

[eddie_ce]

Many thanks to terrybull for sending an interesting excerpt from a book dealing with the introduction of radar and for the speed in which he did so.

[AndrewW]

Big thanks to Mike Phelan for fixing our Smiths Sectric Clock. It’s back on the wall and still running fine.

Also thanks to Mike Barker for fixing the coil.

[vinrads]

I would like to say a big thanks to Chris (high vacuum house) for delivering the Murphy, a true gentleman, Mick.

[Chris55000]

Hi!

My grateful thanks to Dave McMahon & Steve for taking the trouble to send me CD1400 Pictures and the CX1571 pages, plus all the RIAA Preamplifier design and theory information!

I am using the CD1400 information provided by Dave to make a new "Early Versions" Supplement Booklet that will be uploaded when completed – I've begun work on revised circuit diagrams to cover the differences found by Dave, compared to the standard units!

Chris Williams

[DMcMahon]

Many thanks to Terry123 for the Grundig Technical Information Bulletins, lots of interesting reading.

David

[Syrinx1]

Hi,

I just wanted to say thanks to Ed Dinning. He collected and dropped off some stuff from me yesterday, and had chance to have a chat in person. Generous, helpful and interesting chap who I think embodies the spirit of this forum!

Thanks Ed.

[Ed_Dinning]

My thanks to Syrinx, Woodchops and Andiit for retaining stuff for me during the lockdown.
Quite a long trip on Mon, but met some nice people and well worth it

Ed

[frankmcvey]

Thanks to all participating in this thread, the disposal of assorted redundant kit from "Woodchips". Although Bob had given us the stuff FOC, I decided to request a small charity donation for each item to ensure that those bidding genuinely wanted/needed the stuff.

Thanks to your generosity (and Bob's!), the Salvation Army is now better off to the tune of £47.00.

https://imagizer.imageshack.com/v2/640x480q90/924/EPOuWv.jpg

https://imagizer.imageshack.com/v2/640x480q90/923/axidqe.jpg

Cheers,

Frank

[Nickthedentist]

Many thanks to John C. (John M0GLN) for digging out and photographing a very useful (and hard to find) exploded diagram of the UA15 autochanger. And within hours of my asking too

Nick.

[electronicskip]

Thanks to Geoff_555 for the video equipment, had lots of entertaining hours bringing them back to full health.
Thank you.

[Reelman]

Many thanks Terry (Terry123) for the Grundig Technical Information Bulletins, they have information not available anywhere else.
Cheers!
Peter

[Electronpusher0]

Thanks to David Simpson for the very generous gift of two valve base panels and metal case for my curve tracer.

Peter

[cathoderay57]

Big thank you to mole42uk for the Heathkit RF1-U sig gen. Works a treat! Cheers, Jerry

[paulsherwin]

Thanks to Martyn (Icttutor) for the 3G WiFi router and graphics card.

[DMcMahon]

Thanks to HurtyAC for supplying the two Tektronix 2235 scope manuals.

David

[DMcMahon]

Thanks to Gus (westcliffe) for suppling Farnell E30/2 power supply, it will come in very handy.

David

[eddie_ce]

Many thanks to Bill (AC/HL) for sending me two original Mullard diodes FOC, just the job.

Also Bill did not want to be reimbursed for the cost of postage, so according to his wishes I have made a small donation to our local water rescue charity.