UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Components and Circuits

Notices

Components and Circuits For discussions about component types, alternatives and availability, circuit configurations and modifications etc. Discussions here should be of a general nature and not about specific sets.

Reply
 
Thread Tools
Old 29th Nov 2022, 9:57 am   #21
Sideband
Dekatron
 
Sideband's Avatar
 
Join Date: Oct 2003
Location: Croydon, Surrey, UK.
Posts: 7,024
Default Re: Stable ECL80 Amp?

Quote:
Originally Posted by murphyv310 View Post
and the Pye V4 used them as a frequency changer, wonderful little underrated valves.
Well if you can use a PCF80 as a sound output valve why not use an ECL80 as a frequency changer.....?
__________________
There are lots of brilliant keyboard players and then there is Rick Wakeman.....
Sideband is offline   Reply With Quote
Old 29th Nov 2022, 9:27 pm   #22
Synchrodyne
Nonode
 
Join Date: Jan 2009
Location: Papamoa Beach, Bay of Plenty, New Zealand
Posts: 2,843
Default Re: Stable ECL80 Amp?

Pye’s use of the ECL80 as a Band I TV frequency changer was described in IEE paper #1294 of 1952 May, “The Design of a Superheterodyne Receiver for Television” by D. H. Fisher and A. J. Watts.

The writers noted that that although the conversion conductance of the only available triode pentode (i.e. the ECL80) was less than half that of a typical TV pentode, nonetheless, in this case (with a high IF), it was better than either a self-oscillating pentode or a double triode frequency converter.

They then went on to say: “The authors note with regret that there appears to be no efficient triode-pentode available on the British market suitable for frequency-conversion service at the frequencies under consideration.”

The first American TV frequency changer triode pentodes, 6U8 and 6X8, had been released around 1951 August plus/minus, so the authors were probably aware of these. In the UK, the Mazda 10C2 would have been imminent, if not already released, at the time the paper was read, but perhaps unknown when it was written late in 1951.

Be that as it may, if the ECL80 could be made to work as a frequency changer at Band I, then perhaps it would also work at HF, which would make it a frequency changer candidate for the receiver concept that is the subject of the thread: https://www.vintage-radio.net/forum/...d.php?t=195648.


Cheers,
Synchrodyne is offline   Reply With Quote
Reply

Thread Tools



All times are GMT. The time now is 10:14 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.