|
Components and Circuits For discussions about component types, alternatives and availability, circuit configurations and modifications etc. Discussions here should be of a general nature and not about specific sets. |
|
Thread Tools |
27th Oct 2007, 3:50 pm | #1 |
Heptode
Join Date: Aug 2006
Location: Sheffield, South Yorkshire, UK
Posts: 990
|
Bush BP10 front and rear badges
My BP10 is missing both of its badges. I should like to make some sort of replacement for them. So does anyone have any photo's/scans of the front and rear badges for this set please? They don't have to be hi-res or anything, as long as I have an image to refer to as a guide in re-creating them.
Any assistance would be greatly appreciated Last edited by Darren-UK; 28th Mar 2008 at 1:13 am. Reason: Removed ref to old thread. |
27th Oct 2007, 5:51 pm | #2 |
Heptode
Join Date: Apr 2006
Location: Indianapolis, Indiana, USA.
Posts: 674
|
Re: Bush BP10 front and rear badges
Let me see if I can scare up those photos--I've seen them somewhere on my hard drive....
__________________
Just playing with high voltage.... |
27th Oct 2007, 5:54 pm | #3 |
Heptode
Join Date: Apr 2006
Location: Indianapolis, Indiana, USA.
Posts: 674
|
Re: Bush BP10 front and rear badges
Found 'em. And in under a minute. Now I know why it was worth reorganizing that drive...
__________________
Just playing with high voltage.... |
28th Oct 2007, 2:12 am | #4 |
Heptode
Join Date: Aug 2006
Location: Sheffield, South Yorkshire, UK
Posts: 990
|
Re: Bush BP10 front and rear badges
Thanks very much Bill, you're a star!
|