|
Components and Circuits For discussions about component types, alternatives and availability, circuit configurations and modifications etc. Discussions here should be of a general nature and not about specific sets. |
|
Thread Tools |
22nd Nov 2017, 12:07 am | #1 |
Octode
Join Date: Jan 2003
Location: Guildford, Surrey, UK.
Posts: 1,958
|
6-32 UNC self clinching stud
Does anyone have a 6-32 UNC self clinching stud that they can spare. The length needs to be 0.312" or greater. I need just one.
I thought I had one, but it is in fact 8-32 UNC. I've posted a picture of that one in case it rings any bells. The head is designed to grip the panel or sheet it is pressed into and to be flush with the surface. Thanks Ron |
25th Nov 2017, 2:07 pm | #2 |
Octode
Join Date: Jan 2003
Location: Guildford, Surrey, UK.
Posts: 1,958
|
Re: 6-32 UNC self clinching stud
I managed to obtain some 6-32 UNC self clinching head studs from a UK supplier in Sussex. My scope is back to having four feet again.
This thread can be now be closed, thanks. Ron |