Bought a HP8564E & HP8563E Spectrum Analyser-Will I regret it? - Page 3 - UK Vintage Radio Repair and Restoration Discussion Forum

djsbriscoe · 30th Jul 2022, 8:40 pm

Thanks, Mike and Chris,
Cruisin-I did a full recap (well, all the electrolytic and the RIFA, not the Tantalum and the rest). I also replaced a blown resistor in the SMP input filter and a couple of current sense resistors unnecessarily. Just got to fit a new rechargeable battery. I had to fix the silicon rubber on one of the keypad buttons (used SIL-POXY adhesive). It maybe a few weeks before I post again, as I'm taking it slowly so that it stays fixed. Thanks.

30th Jul 2022, 8:40 pm	#41
djsbriscoe Pentode Join Date: May 2015 Location: Hemel Hempstead, Hertfordshire, UK. Posts: 133	Re: Bought a HP8564E & HP8563E Spectrum Analyser-Will I regret it? Thanks, Mike and Chris, Cruisin-I did a full recap (well, all the electrolytic and the RIFA, not the Tantalum and the rest). I also replaced a blown resistor in the SMP input filter and a couple of current sense resistors unnecessarily. Just got to fit a new rechargeable battery. I had to fix the silicon rubber on one of the keypad buttons (used SIL-POXY adhesive). It maybe a few weeks before I post again, as I'm taking it slowly so that it stays fixed. Thanks.