|
Vintage Audio (record players, hi-fi etc) Amplifiers, speakers, gramophones and other audio equipment. |
|
Thread Tools |
21st Jan 2019, 4:43 pm | #1 |
Tetrode
Join Date: Sep 2016
Location: Tring, Hertfordshire, UK.
Posts: 87
|
Audix Vector Amplifier rebuild
I have ben asked to re-commission an old Audix Vector Amplifier.
I has been stored in a garage for the past 12 years. It contains the following modules. 4 x 60w power modules Audix Module D430 with 4 input cards. Master volume and power module. Does any one have a schematic for this amplifier or can provide any advice on the modules listed above. I believe the amps were configured from a set of standard parts and the very original company was Tannoy. |
6th Feb 2019, 9:46 am | #2 |
Tetrode
Join Date: Sep 2016
Location: Tring, Hertfordshire, UK.
Posts: 87
|
Re: Audix Vector Amplifier rebuild
I have re-commissioned the amp and gained experience with this unit.
If anyone has any problems with an Audix I would be happy to help. |