|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
18th Sep 2021, 10:26 am | #1 |
Hexode
Join Date: Jun 2018
Location: Cambridge, Cambridgeshire, UK.
Posts: 262
|
PE06/40N - AVO valve tester settings
I have what I believe to be a valve type PE06/40N
The AVO valve tester settings are given for a PE06/40P as 123 114 500 but the valve tester then reads the Heater as O/C On-line data confirms the heater pins that I can measure OK in practice (the two pins at the bottom in the attachment) Could it be that the different suffix (N to P) is relevant ? Does anyone have the correct settings for the AVO tester? Thanks |
18th Sep 2021, 12:14 pm | #2 |
Dekatron
Join Date: Apr 2011
Location: Cornwall, UK.
Posts: 13,454
|
Re: PE06/40N - AVO valve tester settings
The heater pins on the PE 06/40P are 2 & 3.
The heater pins on the PE 06/40N are 1 & 5. So far as I can make out it would be 254 130 000 for the PE 06/40N. Lawrence. |
18th Sep 2021, 12:55 pm | #3 |
Hexode
Join Date: Jun 2018
Location: Cambridge, Cambridgeshire, UK.
Posts: 262
|
Re: PE06/40N - AVO valve tester settings
Thank you Lawrence
C |