UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment

Notices

Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Closed Thread
 
Thread Tools
Old 13th Dec 2019, 9:16 am   #1
kernowcam
Pentode
 
Join Date: Dec 2011
Location: Camelford, Cornwall, UK.
Posts: 188
Default Marconi TF2016 problem

My trusty TF2016 is back in use.
It's working OK but the output frequency is slowly dropping even after an hours warm up.
Any ideas before I try to locate the manual please?
kernowcam is offline  
Old 13th Dec 2019, 2:39 pm   #2
WME_bill
Octode
 
Join Date: Oct 2007
Location: Exeter, Devon, UK.
Posts: 1,554
Default Re: Marconi tf2016 problem

TF2016.
As it uses different oscillators for the two highest frequency ranges. I suggest identify which frequency ranges give trouble. I suspect a doubtful oscillator transistor or drifting tuning voltages to the vari-cap diodes.
I have the manuals for both TF2016A (HF generator) and TF2015 (VHF generator). Send me a private message if you want a copy, which I will put on a CD. It comes to about 20M.
wme_bill.
WME_bill is offline  
Closed Thread




All times are GMT +1. The time now is 10:44 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.