UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Telephony and Telecomms

Notices

Vintage Telephony and Telecomms Vintage Telephones, Telephony and Telecomms Equipment

Reply
 
Thread Tools
Old 10th Nov 2019, 11:55 pm   #1
peter miller
New Member
 
Join Date: Nov 2019
Location: Gloucester, Gloucestershire, UK.
Posts: 1
Default GEC ST3506, 332 mark1

Handset has a blue wire going in to phone diagram doesn't show where to connect? any ideas where to connect please
peter miller is offline   Reply With Quote
Old 11th Nov 2019, 1:29 pm   #2
198 kHz
Triode
 
198 kHz's Avatar
 
Join Date: May 2014
Location: Worcestershire, UK.
Posts: 10
Default Re: GEC ST3506, 332 mark1

Must be a replacement cord - the original would have had three wires:
Red > T5
Green > T6
White > T4
198 kHz is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 7:17 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2019, Paul Stenning.