UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Telephony and Telecomms

Notices

Vintage Telephony and Telecomms Vintage Telephones, Telephony and Telecomms Equipment

Reply
 
Thread Tools
Old 10th Dec 2020, 3:28 am   #1
Oldmadham
Tetrode
 
Join Date: Sep 2019
Location: Perth, Western Australia, Australia.
Posts: 72
Default "Microscrub"?

Back in the "dear, dead days beyond recall", the Australian PMG's Dept (later Telecom Aust) used to stock, in its Stores Branch, prodigious quantities of what we all called "Microscrub".

It was evidently intended for cleaning contacts on relay sets in Exchanges, but it was marvellous for cleaning "gunk" off all & everything.

In my part of PMG/TA it was regularly used for switch contacts, PCB edge connectors, Jones plugs, etc, & sometimes just for cosmetic purposes to remove general crud build up on metallic surfaces.

It was, grey, made of some sort of plastic,came in strips about 1/4" wide by 8" long.
In appearance, the "business side" of the strips was a little like the "hooky" side of Velcro.

We used it happily for years, just re-ordering as required, until ultimately I left that employer & moved to the Private Sector.
The new job had one piece, which they had apparently "borrowed" from the PMG years before, & which was guarded like the Holy Grail.

They had obviously, tried to obtain more, but nobody outside PMG/TA had heard of it.
Eventually, they gave up, as did I, after trying, to no avail, to find out the source from my previous employer.

After many years, along came the Internet, so for fun, I tried Googling for "Microscrub".
The product of that name which came up was nothing like what I was looking for, which cast some doubt on whether the name we used for years was actually the correct one.
Nor could I find it under any other description.

I can only surmise that with the demise of "step by step" exchanges, the manufacturers assumed it would be unsaleable, & stopped making it.

Considering how effective it was, I'm hoping for my own sanity that someone who worked in a similar area in the UK, (or further afield) may know of this stuff.
Oldmadham is offline   Reply With Quote
Old 10th Dec 2020, 10:52 am   #2
greg_simons
Heptode
 
greg_simons's Avatar
 
Join Date: Jul 2004
Location: Evesham, Worcestershire, UK.
Posts: 909
Default Re: "Microscrub"?

Sounds like the abrasive side of the wife's pan scrubbers, i filtch them for various cleaning purposes.
__________________
Picture, sound?, DOOR.
greg_simons is offline   Reply With Quote
Old 10th Dec 2020, 11:03 am   #3
Nickthedentist
Dekatron
 
Nickthedentist's Avatar
 
Join Date: Jan 2005
Location: Oxford, UK.
Posts: 15,287
Default Re: "Microscrub"?

Mentioned and pictured here: http://www.cpcwiki.eu/forum/amstrad-...-cpc-wifi/875/

And here: https://www.electro-tech-online.com/...-strip.138949/
Nickthedentist is offline   Reply With Quote
Old 10th Dec 2020, 2:12 pm   #4
davidw
Heptode
 
davidw's Avatar
 
Join Date: Sep 2006
Location: Woodbridge, Suffolk, UK.
Posts: 562
Default Re: "Microscrub"?

I liberated this from my van when I moved from tools to management in BT back in the 90s
The bag label has long since disappeared but I seem to recall "strips contact cleaning" was its BT title.
By strange coincidence I was using it only yesterday cleaning pcb edge connectors in my juke box!
Attached Thumbnails
Click image for larger version

Name:	20201210_125251[1].jpg
Views:	98
Size:	23.1 KB
ID:	222255  
__________________
Dave G1AGK.
My perception is my reality!

Last edited by davidw; 10th Dec 2020 at 2:14 pm. Reason: addition
davidw is offline   Reply With Quote
Old 10th Dec 2020, 7:57 pm   #5
dagskarlsen
Heptode
 
dagskarlsen's Avatar
 
Join Date: Jan 2008
Location: Hakadal, Norway
Posts: 526
Default Re: "Microscrub"?

Probably not the same, but I got some strips of "sand paper" from the dentist.
dagskarlsen is offline   Reply With Quote
Reply

Thread Tools



All times are GMT. The time now is 2:10 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.