UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment

Notices

Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Closed Thread
 
Thread Tools
Old 12th Dec 2018, 5:44 pm   #1
mikko rintala
Triode
 
Join Date: Aug 2018
Location: Kauhava, Finland
Posts: 37
Default Univers (Volt/Ampere-Meter) 10-47

Hi.I have those meter to restore but few spool resistor in burn out.
Where i found schematic so i can put right value of resitor in place?

https://www.radiomuseum.org/r/maurit...r_mete_10.html
mikko rintala is offline  
Old 12th Dec 2018, 6:01 pm   #2
Ed_Dinning
Dekatron
 
Join Date: Jan 2004
Location: Newcastle upon Tyne, Tyne & Wear, UK.
Posts: 8,172
Default Re: Univers (Volt/Ampere-Meter) 10-47

Hi Mikko, I may have some suitable resistance wire that you could use to rewind these.
Mail me when you know what type/ size you need.

Ed
Ed_Dinning is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 12:27 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.