UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Radio (domestic)

Notices

Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only.

Closed Thread
 
Thread Tools
Old 30th Nov 2019, 10:37 am   #1
Adam183
Diode
 
Join Date: Jan 2019
Location: Canterbury, Kent, UK.
Posts: 9
Default Regentone W.I.B dc power supply

Hi new here..
Thanks for taking the time to read my post..
I've recently acquired a Regentone W.I.B or possibly W.1.B dc power supply, it uses a selenium rectifier as opposed to a rectifier valve..
Has anyone any information on these, ideally a schematic as it looks like it's been modified.
I have searched the net with no luck, not even a picture of it!
Any help would be much appreciated.
Thanks again.
Adam
Adam183 is offline  
Old 30th Nov 2019, 2:13 pm   #2
'LIVEWIRE?'
Rest in Peace
 
'LIVEWIRE?''s Avatar
 
Join Date: Mar 2006
Location: N.W. Oxfordshire(Chipping Norton)
Posts: 7,306
Default Re: Regentone W.I.B dc power supply

I don't know whether it's the same or similar, but the circuit of the W1F Battery Eliminator is available for £1.99 from the link 'up top'
'LIVEWIRE?' is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 7:35 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.