UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Success Stories

Notices

Success Stories If you have successfully repaired or restored a piece of equipment, why not write up what you did and post details here. Particularly if it was interesting, unusual or challenging. PLEASE DO NOT POST REQUESTS FOR HELP HERE!

Closed Thread
 
Thread Tools
Old 20th Jul 2017, 11:34 am   #1
Deleyeme7777
Triode
 
Join Date: Mar 2013
Location: Brisbane Queensland Australia
Posts: 36
Thumbs up Update on Ekco A22 reproduction radio.

Hi all, some may remember that I was able to reproduce a green AD65 outer casing in threads some time ago, well I said that I was going to attempt an Ekco A22 cabinet in the future, well it's well on the way and I have one not quite finished as yet and when it is I will post a picture or two, plan is to make a red, then a green, and possibly a white, it's been a long term project, but it's all coming together quite nice
Deleyeme7777 is offline  
Old 20th Jul 2017, 12:31 pm   #2
David G4EBT
Dekatron
 
David G4EBT's Avatar
 
Join Date: Feb 2003
Location: Cottingham, East Yorkshire, UK.
Posts: 5,737
Default Re: Update on ekco a22 reproduction radio

Looking forward to the end result - the AD65 was spectacular!
__________________
David.
BVWS Member.
G-QRP Club member 1339.
David G4EBT is offline  
Old 20th Jul 2017, 4:30 pm   #3
Lloyd 1985
Nonode
 
Lloyd 1985's Avatar
 
Join Date: Jun 2008
Location: Coningsby, Lincolnshire, UK.
Posts: 2,814
Default Re: Update on Ekco A22 reproduction radio.

This sounds most interesting! I'd love to have a go myself, I've got a spare A22 chassis in my storage unit gathering dust...

Regards,
Lloyd
Lloyd 1985 is online now  
Old 21st Jul 2017, 10:04 am   #4
Deleyeme7777
Triode
 
Join Date: Mar 2013
Location: Brisbane Queensland Australia
Posts: 36
Default Re: Update on Ekco A22 reproduction radio.

Well blow that dust off of it Lloyd and send it over to me, o could use one
Deleyeme7777 is offline  
Old 21st Jul 2017, 11:17 pm   #5
Deleyeme7777
Triode
 
Join Date: Mar 2013
Location: Brisbane Queensland Australia
Posts: 36
Default Re: Update on Ekco A22 reproduction radio.

Sorry David, almost forgot to thank you for the kind remarks, glad you liked the AD65
Deleyeme7777 is offline  
Old 19th Aug 2017, 6:13 am   #6
Deleyeme7777
Triode
 
Join Date: Mar 2013
Location: Brisbane Queensland Australia
Posts: 36
Default

I have been able to reproduce a couple of cabinets, for the Ekco A22 one in a Red colour and one in the Green colour, not quite finished still needs final polish and a good clean up
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	728
Size:	83.0 KB
ID:	148101   Click image for larger version

Name:	image.jpg
Views:	597
Size:	53.1 KB
ID:	148102  
Deleyeme7777 is offline  
Old 19th Aug 2017, 8:58 am   #7
David G4EBT
Dekatron
 
David G4EBT's Avatar
 
Join Date: Feb 2003
Location: Cottingham, East Yorkshire, UK.
Posts: 5,737
Default Re: Update on Ekco A22 reproduction radio.

Nothing short of stunning!

Can't begin to imagine the work that went into creating the mould and casting the cabinet.

(Presumably male and female moulds too?).

Just need to create the innards now!

It gladdens the heart to see such skill!
__________________
David.
BVWS Member.
G-QRP Club member 1339.
David G4EBT is offline  
Old 19th Aug 2017, 9:42 am   #8
MurphyNut
Heptode
 
MurphyNut's Avatar
 
Join Date: Apr 2016
Location: Croxley Green, Hertfordshire, UK.
Posts: 979
Default Re: Update on Ekco A22 reproduction radio.

Fantastic reproductions, what's the material, how did you go about making the mould? This is very interesting coming from an avid Bakelite collector.
__________________
Clive
MurphyNut is online now  
Old 19th Aug 2017, 10:26 am   #9
Kevin Hoyland
Heptode
 
Join Date: Feb 2009
Location: Rotherham, South Yorkshire, UK.
Posts: 559
Default Re: Update on Ekco A22 reproduction radio.

Hello.
Outstanding work.
Kevin.
Kevin Hoyland is offline  
Old 19th Aug 2017, 12:15 pm   #10
Tractionist
Heptode
 
Join Date: Apr 2016
Location: Cheltenham, Gloucestershire, UK.
Posts: 872
Default Re: Update on Ekco A22 reproduction radio.

Absolutely ...... awesome! Bravo !!
__________________
Red to red, black to black. Throw the switch and stand well back!
Tractionist is offline  
Old 19th Aug 2017, 12:24 pm   #11
Reelman
Octode
 
Reelman's Avatar
 
Join Date: Aug 2008
Location: Rotherham, South Yorkshire, UK.
Posts: 1,700
Default Re: Update on Ekco A22 reproduction radio.

Very, very impressive indeed! There would certainly be a market for those cabinets if you could make enough to sell.
Peter
Reelman is offline  
Old 19th Aug 2017, 8:12 pm   #12
Lloyd 1985
Nonode
 
Lloyd 1985's Avatar
 
Join Date: Jun 2008
Location: Coningsby, Lincolnshire, UK.
Posts: 2,814
Default Re: Update on Ekco A22 reproduction radio.

WOW!!!

They look absolutely stunning! I'll have to see if I can find that old chassis that's lurking in a corner of the storage unit...

Regards,
Lloyd
Lloyd 1985 is online now  
Old 20th Aug 2017, 5:49 am   #13
Deleyeme7777
Triode
 
Join Date: Mar 2013
Location: Brisbane Queensland Australia
Posts: 36
Default Re: Update on Ekco A22 reproduction radio.

Thanks for the positive replies , yes quite a few months to make moulds and the same with the cases, as with the exterior, the case interior has the same detail throughout , it has been extreamly time consuming and I have invested a sum of money into this project as you can imagine ,I have a chassis that I purchased a while ago so when the cabinets are completely finished I will fit to one of them, just not sure which one yet.. I will look for another chassis or two, as I would like a white one as well..I will post the end result, front ..side ..and rear pics
Deleyeme7777 is offline  
Old 20th Aug 2017, 10:02 am   #14
Tractionist
Heptode
 
Join Date: Apr 2016
Location: Cheltenham, Gloucestershire, UK.
Posts: 872
Default Re: Update on Ekco A22 reproduction radio.

Next ..... the knobs? !!!!!
__________________
Red to red, black to black. Throw the switch and stand well back!
Tractionist is offline  
Old 21st Aug 2017, 11:00 am   #15
Deleyeme7777
Triode
 
Join Date: Mar 2013
Location: Brisbane Queensland Australia
Posts: 36
Default Re: Update on Ekco A22 reproduction radio.

No, the knobs ate already made, did them first, that was the easy part, I will post pics if anyone os interested
Deleyeme7777 is offline  
Old 21st Aug 2017, 12:44 pm   #16
Tractionist
Heptode
 
Join Date: Apr 2016
Location: Cheltenham, Gloucestershire, UK.
Posts: 872
Default Re: Update on Ekco A22 reproduction radio.

Dinkum !!!
__________________
Red to red, black to black. Throw the switch and stand well back!
Tractionist is offline  
Old 23rd Aug 2017, 3:35 pm   #17
Retired
Heptode
 
Retired's Avatar
 
Join Date: Mar 2009
Location: Fenay Bridge, Huddersfield. UK.
Posts: 673
Default Re: Update on Ekco A22 reproduction radio.

Hi,

What a fantastic result; you can be truly proud of your achievement; I'm most impressed. It's been asked before but what is the material; is it plastic injection?

Kind regards, Col.
Retired is offline  
Old 23rd Aug 2017, 6:08 pm   #18
neil24-7
Tetrode
 
Join Date: Jan 2016
Location: Jarrow, Tyne and Wear, UK.
Posts: 81
Default Re: Update on Ekco A22 reproduction radio.

Very nice job indeed well done.

I'll have a guess at a 2 part RTV silicone mould suspended in a fibreglass support mould and pigmented resin?

Cheers Neil
neil24-7 is offline  
Old 25th Aug 2017, 8:25 am   #19
Deleyeme7777
Triode
 
Join Date: Mar 2013
Location: Brisbane Queensland Australia
Posts: 36
Default Re: Update on Ekco A22 reproduction radio.

No it's not injected, heat, pressure moulds are in multiple pieces and I use a combination of steel ,stone, plaster, wood, aluminium , tried many things and doing it this way works for me, I am sure others have tried and might have a better way but with the shapes of some radios and being able to reuse the mould, it works for me, the hard work starts when it out of the moulds, takes between 4-6 weeks, the mould for this took me around 7-10 months with all of the planning to do as well, not really cost effective, but it's passion and not always about the money, I have swapped other radio cases for international radios in the past, and probably loose money but my time gets taken up on planning and working out future moulds so don't have the time to chase hard to come by radios
Deleyeme7777 is offline  
Old 25th Aug 2017, 9:43 am   #20
Mach One
Heptode
 
Mach One's Avatar
 
Join Date: Sep 2005
Location: Shoreham-by-Sea, West Sussex, UK.
Posts: 610
Default Re: Update on Ekco A22 reproduction radio.

I'm not at all aware of the technology, but I suppose that such reproduction cabinets could be made with 3D printing?
Mach One is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 12:37 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.