UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Hints, Tips and Solutions (Do NOT post requests for help here)

Notices

Hints, Tips and Solutions (Do NOT post requests for help here) If you have any useful general hints and tips for vintage technology repair and restoration, please share them here. PLEASE DO NOT POST REQUESTS FOR HELP HERE!

Reply
 
Thread Tools
Old 3rd Jul 2020, 2:04 pm   #1
jonnybear
Octode
 
jonnybear's Avatar
 
Join Date: Nov 2010
Location: Cullompton, Devon, UK.
Posts: 1,265
Default Remote control repairs

Remote controls, once the pads have become none conductive they can be a pain, I have tried a pad repair kit that costs a fortune and lasts a few months conductive paint enough said, really the only solution has been replacement control, until I started messing around with a needle and thin wire, I found by stitching a cross on the pad it worked quite well and has now lasted well over a year with no problems, see picture.
john
Attached Files
File Type: doc remote.doc (430.0 KB, 96 views)
jonnybear is offline   Reply With Quote
Old 3rd Jul 2020, 3:10 pm   #2
Lloyd 1985
Octode
 
Lloyd 1985's Avatar
 
Join Date: Jun 2008
Location: Coningsby, Lincolnshire, UK.
Posts: 1,797
Default Re: Remote control repairs

Ah, yes! I did that to my Nan’s remote for her Virgin media box, the ‘0’ button had given up and made it very hard for her to get the channel she wanted. I did t have any thin copper wire to hand, so I ended up finding one of those plastic covered wire tie things that come with new cables, stripped the plastic off and used the wire from inside it as you have. Worked a treat, and didn’t need me to take the remote away for repair, she was very happy that it was all done quickly and she could use the telly again!

Regards
Lloyd
Lloyd 1985 is online now   Reply With Quote
Old 3rd Jul 2020, 3:34 pm   #3
Hartley118
Octode
 
Hartley118's Avatar
 
Join Date: Aug 2015
Location: Cambridge, Cambs. UK.
Posts: 1,596
Default Re: Remote control repairs

Sometimes an emergency repair is the only option, but more generally I've found it easier and cheaper just to treat the remote as a component in its own right and get a replacement from the likes of https://www.remotes4u.co.uk/home.php .

I've been impressed by the sheer number and variety of remotes available. Whether through loss or damage, it's interesting that the supply of replacement remotes is a significant business opportunity.

Martin
__________________
BVWS Member
Hartley118 is online now   Reply With Quote
Old 3rd Jul 2020, 3:38 pm   #4
mickm3for
Hexode
 
Join Date: May 2015
Location: Chatham, Kent, UK.
Posts: 307
Default Re: Remote control repairs

Hi i have repaired a humax rc play button using a small aluminium disc cut from Baco foil glued to pad 1 year + ago still ok Mick
mickm3for is offline   Reply With Quote
Old 3rd Jul 2020, 3:59 pm   #5
jonnybear
Octode
 
jonnybear's Avatar
 
Join Date: Nov 2010
Location: Cullompton, Devon, UK.
Posts: 1,265
Default Re: Remote control repairs

Quote:
Originally Posted by mickm3for View Post
Hi i have repaired a humax rc play button using a small aluminium disc cut from Baco foil glued to pad 1 year + ago still ok Mick
Never had a lot of luck with gluing silicone rubber always finished up like sticky gunge, unless someone knows of a glue that will stick.
John
jonnybear is offline   Reply With Quote
Old 3rd Jul 2020, 6:03 pm   #6
SiriusHardware
Dekatron
 
Join Date: Aug 2011
Location: Newcastle, Tyne and Wear, UK.
Posts: 4,234
Default Re: Remote control repairs

The 'Proper stuff' (Black rubbery conductive paint) works well if applied properly to a well cleaned and if necessary roughened surface and allowed to dry for the full recommended term before reassembly.

Silver metallic conductive paint of the type used for track repairs is not flexible enough and will eventually disintegrate into tiny little flecks of conductive dandruff.
SiriusHardware is offline   Reply With Quote
Old 3rd Jul 2020, 7:04 pm   #7
Boulevardier
Heptode
 
Join Date: Sep 2017
Location: Bristol, UK.
Posts: 586
Default Re: Remote control repairs

Quote:
Originally Posted by SiriusHardware View Post
The 'Proper stuff' (Black rubbery conductive paint) works well if applied properly to a well cleaned and if necessary roughened surface and allowed to dry for the full recommended term before reassembly.

Silver metallic conductive paint of the type used for track repairs is not flexible enough and will eventually disintegrate into tiny little flecks of conductive dandruff.
If looking online for that "proper stuff", what would one Google for? Is there a particular brand?

Mike
Boulevardier is offline   Reply With Quote
Old 4th Jul 2020, 1:46 pm   #8
Superscope
Hexode
 
Join Date: May 2017
Location: St Austell, Cornwall, UK.
Posts: 341
Default Re: Remote control repairs

You used to be able to buy Conductive rubber sheets.

I used to fix remotes, by cutting small Pads out of the sheet and
Super Glueing them to what was left of the original Pad.
Worked a treat.
The Sheet was about Half a mm thick as I remember.

Can't remember where I got the Sheet from now, it was many Years ago.
Probably Maplin (when they were a useful Componant supplier) or RS.
Definately before Ebay existed!

You must still be able to get it somewhere.


Ian
Superscope is offline   Reply With Quote
Old 4th Jul 2020, 3:09 pm   #9
Lloyd 1985
Octode
 
Lloyd 1985's Avatar
 
Join Date: Jun 2008
Location: Coningsby, Lincolnshire, UK.
Posts: 1,797
Default Re: Remote control repairs

The problem we had with our old Sony tv remote was that the keypad itself was oozing out some sort of clear liquid, which had insulating properties! It would coat the PCB and the conductive pads and stop it working, cleaning it normally resulted in normal operation for a few weeks before it came back again. I thought someone had spilled something on it when I first saw it, but then it kept coming back and I was sure it hadn’t been subjected to any liquid. Eventually the rubber pads stopped being conductive, so I tried glueing bits of foil to them, but they wouldn’t stay stuck because that liquid would build up behind the glue and push it off. After many short lived attempts at repair I finally gave in and bought a new pattern remote, which is doing sterling service currently, operating a 14 year old flat screen! Never thought it’d live this long!

Regards
Lloyd
Lloyd 1985 is online now   Reply With Quote
Old 4th Jul 2020, 3:47 pm   #10
robinshack
Octode
 
robinshack's Avatar
 
Join Date: Jun 2010
Location: Spalding, Peterborough, Cambridgeshire, UK.
Posts: 1,167
Default Re: Remote control repairs

The company in post #3 has the genuine samsung remote for my smart tv for 47.95 or a custom made, by Classic, a German company for a third of that price. Both have 1 year warranty.
Found by entering my tv model and remote keywords in google, came up with the same remote4u company, but as alternative item.
Rob
__________________
I am also interested in and collect 00 model railway.
robinshack is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 1:30 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.