|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
8th Jun 2008, 4:30 pm | #1 |
Nonode
Join Date: Mar 2008
Location: Aberdeen, UK.
Posts: 2,853
|
Time Electronics 2003N
Manual required for 2003N Voltage Potentiometer/Calibrator, or it's replacement - the 1010 DC Millivolt Calibrator. Thanks, David
|
8th Jun 2008, 5:56 pm | #2 |
Retired Dormant Member
Join Date: Mar 2008
Location: Hampshire, UK.
Posts: 297
|
Re: Time Electronics 2003N
Hello David.
I have the 27 page manual for the 203N and 2003S. Shall scan and make available ASAP. R |
8th Jun 2008, 6:31 pm | #3 |
Retired Dormant Member
Join Date: Mar 2008
Location: Hampshire, UK.
Posts: 297
|
Re: Time Electronics 2003N
|
9th Jun 2008, 11:48 am | #4 |
Nonode
Join Date: Mar 2008
Location: Aberdeen, UK.
Posts: 2,853
|
Re: Time Electronics 2003N
Hello R, Many thanks for the download. Most appreciated. I was actually given "free" a 2003N last week. It's only fault was a u/s null meter - sticking badly. However, the 2003N has been superseeded by the 1010. But the 1010 is just a 2003N - without the null facility ! It retails new at nearly £800, and second-hand at approx £180 ! Mind you - its my birthday this month.
It will be ideal for checking old Avo 8's, and my digital Avo multimeter is spot on according to the 2003N. Regards, David |
9th Jun 2008, 11:54 am | #5 |
Nonode
Join Date: Mar 2008
Location: Aberdeen, UK.
Posts: 2,853
|
Re: Time Electronics 2003N
Hello again R, Just checked the pdf file - it seems to have the letters - "R F J" superimposed on every page - thus blanking out the centre.
Regards, David |
9th Jun 2008, 10:25 pm | #6 |
Retired Dormant Member
Join Date: Mar 2008
Location: Hampshire, UK.
Posts: 297
|
Re: Time Electronics 2003N
Hello David,
As per our off-line discussions, here is a copy with the water mark removed so that it does not interfere with the printing. Time2003N_2003S_NW.pdf Regards, R |
10th Jun 2008, 7:42 am | #7 |
Octode
Join Date: Feb 2007
Location: Ely, Cambridgeshire, UK.
Posts: 1,976
|
Re: Time Electronics 2003N
very usefull have a 1010 i was given
cheers vince |
10th Jun 2008, 10:59 am | #8 |
Nonode
Join Date: Mar 2008
Location: Aberdeen, UK.
Posts: 2,853
|
Re: Time Electronics 2003N
Many thanks to AVO VCM163 for his help & computer wizardry. 2003N Manual most appreciated.Shall close thread.
Regards, David |
10th Jun 2008, 12:13 pm | #9 |
Nonode
Join Date: Jun 2005
Location: Western Lake District, Cumbria (CA20) - UK
Posts: 2,136
|
Re: Time Electronics 2003N
As we all seem happy I'll close this thread now and move it to Vintage Test Equipment so that it has a chance of being archived in due course.
Regards,
__________________
Brian |