|
|
|
|
|||||||
| Vintage Audio (record players, hi-fi etc) Amplifiers, speakers, gramophones and other audio equipment. |
 |
|
|
Thread Tools |
23rd Mar 2019, 11:02 am
|
#1 |
|
Retired Dormant Member
Join Date: Mar 2019
Location: Leeds, West Yorkshire, UK.
Posts: 2
|
Pickup Arm Identification
I'll hold my hands up - I'm not a vintage audio buff - just looking for help in identifying the pickup arm on a Garrard 401 left by my late Father - yes, he mounted it on a chipboard plinth!
Any help gratefully received - Thank you. |
|
|
23rd Mar 2019, 12:07 pm
|
#2 |
|
Heptode
Join Date: Jul 2008
Location: Hereford, UK.
Posts: 719
|
Re: Pickup Arm Identification
I think it's an Acos Lustre
|
|
|
|
23rd Mar 2019, 12:11 pm
|
#3 |
|
Dekatron
Join Date: Nov 2003
Location: Fakenham, Norfolk, UK.
Posts: 4,255
|
Re: Pickup Arm Identification
|
|
|
23rd Mar 2019, 12:30 pm
|
#4 |
|
Retired Dormant Member
Join Date: Mar 2019
Location: Leeds, West Yorkshire, UK.
Posts: 2
|
Re: Pickup Arm Identification
Thank you very much gents...
Is it good enough to warrant selling separately from the deck, or should I just keep them together? And guess what I just found! |
|
|
|
23rd Mar 2019, 1:06 pm
|
#5 |
|
Nonode
Join Date: May 2004
Location: Halifax, West Yorkshire, UK.
Posts: 2,587
|
Re: Pickup Arm Identification
You'll almost certainly make more by selling them separately.
Alan |
|
|
|
23rd Mar 2019, 1:40 pm
|
#6 |
|
Nonode
Join Date: Jun 2014
Location: Bristol, UK.
Posts: 2,074
|
Re: Pickup Arm Identification
I had one quite a few years ago and it was a nice tonearm. I was surprised as to how well it did at auction when I came to sell it. Acos used to make some good stuff - I wonder what became of them?
__________________
'....don't go mistaking Paradise for that home across the road!' (Bob Dylan) |
|
|
|
23rd Mar 2019, 2:32 pm
|
#7 |
|
Dekatron
Join Date: Jul 2008
Location: Kington, Herefordshire, UK.
Posts: 3,670
|
Re: Pickup Arm Identification
Cosmocord, it appears, expired in the mid-80s - their expertise was in crystal and ceramic transducers, and the Lustre and M series magnetic cartridges were bought in from Japan.
|
|
|
|
23rd Mar 2019, 9:29 pm
|
#8 |
|
Moderator
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 22,858
|
Re: Pickup Arm Identification
I used one for years. It is a very satisfactory arm. Not quite as finely engineered as an SME 3009, but it's well worth keeping.
There is a little toothed belt from the anti-skating knob to the anti-skating magnet that can be a problem to replace. David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done |
|
|
