|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
9th Apr 2019, 5:32 pm | #1 |
Hexode
Join Date: Nov 2006
Location: Biedenkopf, [Hessen], Germany.
Posts: 425
|
Adjusting a Hickok DP200
hello friends,
I am on the search for a calibration + adjust instruction manual or data, informations, to adjust a Hickok Plugin DP 200 (this is a capacitor tester plugin ) in the Hickok Digital System DMS 3200 thank you for any informations. greetings from germany Martin
__________________
www.wellenkino.de Vintage Scope restorations |
9th Apr 2019, 8:46 pm | #2 |
Octode
Join Date: Jul 2009
Location: Cheshire, UK.
Posts: 1,733
|
Re: Adjusting a Hickok DP200
I bought manuals for some of the Plug-ins for the Hickok DMS meter from Manualsplus before they closed down, I will have to add it to my backlog of tasks to photo the relevant bits for you.
Note: The Hickok DMS range was also sold in the UK rebranded by Farnell, I don't know the UK ones were made over here though, as I haven't got one. David |
14th Apr 2019, 11:04 am | #3 |
Hexode
Join Date: Nov 2006
Location: Biedenkopf, [Hessen], Germany.
Posts: 425
|
Re: Adjusting a Hickok DP200
thank you much for any information.
This DP200 displays in general around - some % from the true Capacitance. So a 47µF will be tested 44µF , a 34nF is a 33.4nF and so on. the power supply in the DMS3200 deliver ±20.1V with a ripple of <5mV this may be OK. I found a 549K 1% what is 560k, will change that.
__________________
www.wellenkino.de Vintage Scope restorations |
14th Apr 2019, 9:03 pm | #4 |
Octode
Join Date: Jul 2009
Location: Cheshire, UK.
Posts: 1,733
|
Re: Adjusting a Hickok DP200
I have tried a free app someone recommended to create some PDF's of the manual.
Here are PDF's of the specifications, calibration procedure, component locations, parts list and the circuit diagram, hope they help. The calibration procedure requires 100pF-1.111uF & 1-999uF standards (both 0.05%), not sure many people will have those, I certainly don't. DP200 Specifications.pdf DP200 Calibration.pdf DP200 Component Locations.pdf DP200 Parts List.pdf DP200 Circuit Diagram.pdf David P.S. Do you want me to scan the operation instructions, circuit description & service procedure? |
15th Apr 2019, 7:15 pm | #5 |
Hexode
Join Date: Nov 2006
Location: Biedenkopf, [Hessen], Germany.
Posts: 425
|
Re: Adjusting a Hickok DP200
thank you very much !
I will see to become a useful calibration of that nixie. This will take a time. Martin
__________________
www.wellenkino.de Vintage Scope restorations |