UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Radio (domestic)

Notices

Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only.

Reply
 
Thread Tools
Old 1st Aug 2020, 2:28 pm   #1
Ken Taylor
Triode
 
Ken Taylor's Avatar
 
Join Date: Dec 2015
Location: Abingdon on Thames, Oxon, UK.
Posts: 38
Default Bush AC.34 repair

Hello all,

I have just collected a Bush AC.34 from a dog walking associate and he would like to have it going again, he says. It seems complete and I am told it works but make a horrible noise, so that's either an electronic fault or he is tuned to a pop music station (showing my age here of course). I have downloaded the service data but would appreciate any hints and tips on the peculiarities of this set before I start, although I shall obviously change THAT capacitor as a matter of course.

Thanks
Ken
Ken Taylor is offline   Reply With Quote
Old 1st Aug 2020, 3:37 pm   #2
Cobaltblue
Dekatron
 
Cobaltblue's Avatar
 
Join Date: Dec 2010
Location: Exeter and Poole, UK.
Posts: 3,813
Default Re: Bush AC34 repair

Hi Ken

The horrible noise might not be due to a fault in the radio (although I am sure it will have a few faults).

Modern devices use SMPS and these can play havoc on AM radio's reception.

So once "done" it may still make a racket once returned to the owner.

Just worth bearing in mind

Other than that the reservoir and smoothing capacitor seem to reform well on most Bush sets of this age but the UL41 can be a bit notorious for hum when aged.

For what ever reason they seem to fare better (longer quieter life) in sets using a transformer for the heaters than the AC/DC sets.

You may need to change more than just the grid coupling capacitor, many change all the wax paper capacitors on sight and if its for someone else this may be the best approach.

Nice sets they sound pretty good.

Cheers

Mike T
__________________
Don't care if it was a bargain why's it in my kitchen
Mike T BVWS member.
www.cossor.co.uk
Cobaltblue is online now   Reply With Quote
Old 1st Aug 2020, 9:40 pm   #3
Ken Taylor
Triode
 
Ken Taylor's Avatar
 
Join Date: Dec 2015
Location: Abingdon on Thames, Oxon, UK.
Posts: 38
Default Re: Bush AC.34 repair

Thanks Mike. Yes, it could have been interference of course. I have found that the mains switch is jammed and a previous repairer has just shorted it out! OK on the waxy capacitors, I have some replacements left over from my DAC90a refurb earlier this year and I'll change them all eventually. I checked all the resistors in situ and none seem too far out of tolerance. The cabinet needs some attention but I'm not great at woodwork. It's intact but in need of some TLC.

I'll try it on the lamp limiter tomorrow.

All the best
Ken


I would like to replace the volume/off-on switch, any idea where I could get one? 2M ohm, Log with DPST switch and fairly long shaft.
Ken Taylor is offline   Reply With Quote
Old 1st Aug 2020, 9:51 pm   #4
David G4EBT
Dekatron
 
David G4EBT's Avatar
 
Join Date: Feb 2003
Location: Cottingham, East Yorkshire, UK.
Posts: 4,141
Default Re: Bush AC.34 repair

Bowood Electronics have them:

https://www.bowood-electronics.co.uk...-log-switched/

Hope that helps.

Good luck with the restoration Ken.
__________________
David.
BVWS Member.
G-QRP Club member 1339.
David G4EBT is online now   Reply With Quote
Old 2nd Aug 2020, 8:19 am   #5
John10b
Octode
 
Join Date: Nov 2016
Location: Aberaeron, Ceredigion, Wales, UK.
Posts: 1,622
Default Re: Bush AC.34 repair

I recently restored a Bush AC34, itís a nice set to work on, the main problem I had was IF problem, this turned out to be a fractured wire on the capacitor inside the IF can, I was able to bridge the break and up came the gain, made a huge difference. Also the cabinet was in poor condition. I stripped the cabinet and applied Danish Oil and obtained a Bush Transfer from David G4EBT, the final result was very pleasing. Hope you enjoy your project.
John
Attached Thumbnails
Click image for larger version

Name:	1875D1E5-040E-4012-89CF-FCD759013761.jpg
Views:	78
Size:	110.7 KB
ID:	212439   Click image for larger version

Name:	5B88A125-BFBB-45AF-917D-9336E950D690.jpg
Views:	66
Size:	103.8 KB
ID:	212440  
John10b is offline   Reply With Quote
Old 2nd Aug 2020, 3:05 pm   #6
Ken Taylor
Triode
 
Ken Taylor's Avatar
 
Join Date: Dec 2015
Location: Abingdon on Thames, Oxon, UK.
Posts: 38
Default Re: Bush AC.34 repair

David, thanks for the Bowood link - I have put together an order.

And thank you John for your input. My cabinet needs some work but I will talk to the owner first. I was a bit concerned as to where I could get a new transfer but you have answered that one too.

All the best
Ken
Ken Taylor is offline   Reply With Quote
Old 2nd Aug 2020, 4:27 pm   #7
John10b
Octode
 
Join Date: Nov 2016
Location: Aberaeron, Ceredigion, Wales, UK.
Posts: 1,622
Default Re: Bush AC.34 repair

If you do decide to tackle the cabinet, donít over do it with the sandpaper, I was a bit too vigorous In one spot.
John
John10b is offline   Reply With Quote
Old 2nd Aug 2020, 9:39 pm   #8
Ken Taylor
Triode
 
Ken Taylor's Avatar
 
Join Date: Dec 2015
Location: Abingdon on Thames, Oxon, UK.
Posts: 38
Default Re: Bush AC.34 repair

Well I have now put some power on it via the lamp limiter. It works although the bulbs don't light but it tunes and find stations. An there is hum. It does get a little louder with volume, but when a station is tuned in the audio is very distorted. I suspect this is the "horrible noise" the owner reported. Does this sound like the UL41? I'll swap the one out of the DAC90a to test but I have to pack everything away for a week now as we have visitors next weekend and the "workshop" has to be returned to a bedroom.
Thanks again for the advice.
Ken
Ken Taylor is offline   Reply With Quote
Old 2nd Aug 2020, 10:06 pm   #9
Freya
Octode
 
Freya's Avatar
 
Join Date: Jan 2009
Location: Falmouth, Cornwall, UK.
Posts: 1,678
Default Re: Bush AC.34 repair

Start with the previously mentioned coupling capacitor before swapping valves. The hum is likely to be the main smoother capacitor.
__________________
Stephen
________________________

"It`s only an old telly"
Freya is online now   Reply With Quote
Old 5th Aug 2020, 6:10 pm   #10
Ken Taylor
Triode
 
Ken Taylor's Avatar
 
Join Date: Dec 2015
Location: Abingdon on Thames, Oxon, UK.
Posts: 38
Default Re: Bush AC.34 repair

Thanks for the advice. The pot and capacitors have arrived from Bowoods so I'll make a start on Monday.

Ken
Ken Taylor is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 8:59 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.