UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Television and Video

Notices

Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc.

Reply
 
Thread Tools
Old 14th Oct 2018, 10:10 am   #21
Freya
Octode
 
Freya's Avatar
 
Join Date: Jan 2009
Location: Falmouth, Cornwall, UK.
Posts: 1,545
Default Re: Cleaning video heads etc

I use paper also.
__________________
Stephen
________________________

"It`s only an old telly"
Freya is offline   Reply With Quote
Old 14th Oct 2018, 1:05 pm   #22
rambo1152
Octode
 
rambo1152's Avatar
 
Join Date: May 2010
Location: Manchester, UK.
Posts: 1,082
Default Re: Cleaning video heads etc

I used a 5 note. Tips rarely extended to a tenner. Modern plastic banknotes probably won't work.
__________________
--
Graham.
G3ZVT
rambo1152 is offline   Reply With Quote
Old 14th Oct 2018, 2:02 pm   #23
brunel
Heptode
 
brunel's Avatar
 
Join Date: Sep 2005
Location: LEEDS.......north of the River Aire.
Posts: 687
Default Re: Cleaning video heads etc

Once, when desperate, a bit of card + vodka.
brunel is online now   Reply With Quote
Old 14th Oct 2018, 3:07 pm   #24
M3VUV51
Pentode
 
Join Date: Feb 2018
Location: Horncastle, Lincolnshire, UK.
Posts: 136
Default Re: Cleaning video heads etc

anyone ever used p40 paper?
M3VUV51 is offline   Reply With Quote
Old 14th Oct 2018, 10:56 pm   #25
AC/HL
Moderator
 
AC/HL's Avatar
 
Join Date: Nov 2003
Location: Heckmondwike, West Yorkshire, UK.
Posts: 6,899
Default Re: Cleaning video heads etc

I take it you mean thermal printer paper, similar to any other paper I'd think.
__________________
Bill, BVWS member
AC/HL is online now   Reply With Quote
Old 14th Oct 2018, 11:21 pm   #26
SiriusHardware
Nonode
 
Join Date: Aug 2011
Location: Newcastle, Tyne and Wear, UK.
Posts: 2,622
Default Re: Cleaning video heads etc

For heads which are not too heavily soiled I often found that playing a 'Chrome' or especially a 'Metal' tape all the way through, if necessary more than once, was enough to clear the problem, the premise being that these types were inherently more abrasive than standard tapes.
SiriusHardware is online now   Reply With Quote
Old 27th Nov 2018, 12:20 am   #27
goughy57
Diode
 
Join Date: Jun 2018
Location: Cardiff, Wales, UK.
Posts: 9
Default Re: Cleaning video heads etc

It brought back some memories reading this of my days on the bench. I used to find what worked best for me was my finger nail. I used to hold the nail on my fore finger against the rotating head as it played a tape. Always cleared the most stubborn head for me.
goughy57 is offline   Reply With Quote
Old 7th Feb 2019, 8:37 pm   #28
sandpit252423
Diode
 
Join Date: Feb 2019
Location: Driffield, East Yorkshire, UK.
Posts: 5
Default Re: Cleaning video heads etc

To clean video heads i always used a very small square of shamieleather and acetone, dirty heads wont play anything, clean worn heads play good recordings but play own recordings badly with black/white marks on. I hope this helps.
sandpit252423 is offline   Reply With Quote
Old 8th Feb 2019, 12:23 pm   #29
rambo1152
Octode
 
rambo1152's Avatar
 
Join Date: May 2010
Location: Manchester, UK.
Posts: 1,082
Default Re: Cleaning video heads etc

Quote:
Originally Posted by sandpit252423 View Post
To clean video heads i always used a very small square of shamieleather and acetone, dirty heads wont play anything, clean worn heads play good recordings but play own recordings badly with black/white marks on. I hope this helps.
I'd be seriously concerned that the acetone would dissolve the vanish insulation on the coil winding!
__________________
--
Graham.
G3ZVT
rambo1152 is offline   Reply With Quote
Old 8th Feb 2019, 12:27 pm   #30
HamishBoxer
Dekatron
 
HamishBoxer's Avatar
 
Join Date: Aug 2007
Location: W.Butterwick, near Doncaster UK.
Posts: 6,331
Default Re: Cleaning video heads etc

I never use anything other than IPA.
__________________
G8JET BVWS Member and V.M.A.R.S
HamishBoxer is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 3:39 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.