Wanted:Wire schematic for philips 830A - UK Vintage Radio Repair and Restoration Discussion Forum

Ben_Dijkman · 21st Dec 2008, 12:55 am

Hello.
I have the usual technical schematic allready.
I know that there are allso drawings from this chassies with all of the components and the way the wire are fit to these components.
In Holland only the usual doc. is available for this radio.
A self made drawing or good detailed pictures are verry welcome.
Specially from the wires that come from the 2 C "boxes" .

MarcoBerti · 22nd Dec 2008, 9:55 pm

Hi,

after a check at my documentation, I'm posting the nearest thing I've found to what you need.
Email me if you need the whole SM in german.

Marco

Ben_Dijkman · 23rd Dec 2008, 9:24 am

Hello Marco.

This is inndeed allso verry usefull to find the parts, next to the technical
schematic.
I'm repairing the condensorboxes and some circuits that where chanced during his long lifetime. Even soms parts are missing in this radio.(These parts I've found allready)
Only with the technical schematic, a not so verry good edjucated repairman like me,
has a verry tough job to find the right parts that should be connected the original way.
Thanks a lot for your help!
Merry Christmas and the verry best for 2009!
Best regards,
Ben Dijkman

21st Dec 2008, 12:55 am	#1
Ben_Dijkman Pentode Join Date: Oct 2004 Location: Hellendoorn, Netherlands Posts: 137	Wanted:Wire schematic for philips 830A Hello. I have the usual technical schematic allready. I know that there are allso drawings from this chassies with all of the components and the way the wire are fit to these components. In Holland only the usual doc. is available for this radio. A self made drawing or good detailed pictures are verry welcome. Specially from the wires that come from the 2 C "boxes" . Attached Thumbnails

22nd Dec 2008, 9:55 pm	#2
MarcoBerti Tetrode Join Date: Oct 2008 Location: Milano, Italy Posts: 62	Re: Wanted:Wire schematic for philips 830A Hi, after a check at my documentation, I'm posting the nearest thing I've found to what you need. Email me if you need the whole SM in german. Marco Attached Thumbnails

23rd Dec 2008, 9:24 am	#3
Ben_Dijkman Pentode Join Date: Oct 2004 Location: Hellendoorn, Netherlands Posts: 137	Re: Wanted:Wire schematic for philips 830A Hello Marco. This is inndeed allso verry usefull to find the parts, next to the technical schematic. I'm repairing the condensorboxes and some circuits that where chanced during his long lifetime. Even soms parts are missing in this radio.(These parts I've found allready) Only with the technical schematic, a not so verry good edjucated repairman like me, has a verry tough job to find the right parts that should be connected the original way. Thanks a lot for your help! Merry Christmas and the verry best for 2009! Best regards, Ben Dijkman