|
Components and Circuits For discussions about component types, alternatives and availability, circuit configurations and modifications etc. Discussions here should be of a general nature and not about specific sets. |
|
Thread Tools |
9th May 2019, 1:38 pm | #1 |
Octode
Join Date: Apr 2019
Location: Margate, Kent, UK.
Posts: 1,723
|
Quad 2 power amplifier choke
Hi all.
All new to me. I bought Quad 2 but the choke is leaking lots of tar from the solder turrets as soon as heat is applied. Managed to pull it out of housing although the in and out wires had broken off the turret terminals. Can someone tell me how to rewire to top panel. I looked at the schematic but there's no indication of where the wires go on the 4 points. Pics attached. Many thanks, Chris. |