UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Cabinet and Chassis Restoration and Refinishing

Notices

Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here.

Closed Thread
 
Thread Tools
Old 27th Jan 2020, 1:31 pm   #1
Nanozeugma
Heptode
 
Nanozeugma's Avatar
 
Join Date: Nov 2017
Location: London, UK. Bury, Lancashire quite regularly :)
Posts: 609
Default Black crackle or crinkle finish.

Hi.
I have recently acquired an AVO Test Bridge, the meter movement dates it to 10/47. This one is the second iteration using a 6B8G and no Westector.
It was in pretty decent condition when I received it, and looks even better after a good clean. It appears original inside.

However.
The sheet metal case into which it fits has suffered paint loss in a couple of places which mars the appearance somewhat.

The finish is a tight black crinkle.

Q. Is it still possible to obtain paint to replicate this finish?

Thanks in advance for any insight
Attached Thumbnails
Click image for larger version

Name:	AB1.jpg
Views:	133
Size:	103.2 KB
ID:	197848   Click image for larger version

Name:	case.jpg
Views:	170
Size:	84.5 KB
ID:	197849  
__________________
Thermionic Emission, warms the cockles of your tubes.
Nanozeugma is offline  
Old 27th Jan 2020, 1:42 pm   #2
G6Tanuki
Dekatron
 
G6Tanuki's Avatar
 
Join Date: Apr 2012
Location: Wiltshire, UK.
Posts: 13,951
Default Re: Black crackle or crinkle finish.

It's used on the dashboards of 50s/60s MG cars, and is available from Frost.

https://www.frost.co.uk/vht-black-wrinkle-finish-310ml/
G6Tanuki is offline  
Old 30th Jan 2020, 1:36 pm   #3
Nanozeugma
Heptode
 
Nanozeugma's Avatar
 
Join Date: Nov 2017
Location: London, UK. Bury, Lancashire quite regularly :)
Posts: 609
Default Re: Black crackle or crinkle finish.

Thank you for that, appreciated.
__________________
Thermionic Emission, warms the cockles of your tubes.
Nanozeugma is offline  
Old 18th Mar 2020, 3:56 am   #4
FrankB
Heptode
 
Join Date: Oct 2005
Location: Olympia, Washington, USA.
Posts: 663
Default Re: Black crackle or crinkle finish.

Some of the wrinkle/ crackle finishes I have used here in the U.S. have required "curing" in the oven at 200 deg.F, others do not.
Be sure to check the paint type you buy.
FrankB is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 11:01 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.