UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment

Notices

Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Closed Thread
 
Thread Tools
Old 19th May 2008, 10:23 pm   #1
sorenkir
Retired Dormant Member
 
Join Date: May 2008
Location: Grenoble, France
Posts: 7
Default GOULD 4072 DSO : CCD problem ?

Hello all,

I have a problem with this scope.
The traces coming from the 8 CCDs are not superimposed, forming multiple traces instead of one, see photo.
I have tried auto calibration with no success. General CCD offset adjustement has no effect on this problem.

Does anyone have an idea ?
Or a schematic of the CCD board ?

I have no manual (except pdf extract from "WME bill" on this forum, which helped me for manual calibration)

Thanks in advance,
Michel
Grenoble - France

http://sorenkir.free.fr/images/IMG_7421_r.jpg
sorenkir is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 1:43 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.