|
Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment. |
|
Thread Tools |
20th Mar 2018, 7:20 pm | #1 |
Hexode
Join Date: Mar 2011
Location: Wilstead, Bedfordshire, UK.
Posts: 367
|
HRO Screening cans
Hi all
I am tidying up my HRO and have just changed the plastic covers over the calibration charts and logging chart and I must say it looks pretty good. What I am after now is, on top of the screening cans is what could be loosely termed as "top hats" these cover the grid caps of the valves, I am missing 4 of these if anyone has some spare ones I would be appreciative. All costs will be reimbursed. Also, with an HRO-7 is the base just a flat piece of steel, or is the rear edge bent over at 90 degrees and the front edge have a step in it to go under the front bottom of the receiver. Regards. Bill. |