UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Television and Video

Notices

Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc.

Closed Thread
 
Thread Tools
Old 2nd Sep 2019, 9:02 pm   #81
sexton_mallard
Hexode
 
sexton_mallard's Avatar
 
Join Date: Sep 2013
Location: Ellesmere, Shropshire, UK & Co. Cork, Ireland.
Posts: 499
Default Re: Kolster Brandes RV 10 (Crown)

Thank you so much John. You have a PM.
__________________
Dom

Less snakes...more ladders!

Last edited by sexton_mallard; 2nd Sep 2019 at 9:08 pm. Reason: Grammar
sexton_mallard is offline  
Old 3rd Sep 2019, 12:59 pm   #82
Hunts smoothing bomb
Octode
 
Hunts smoothing bomb's Avatar
 
Join Date: Oct 2005
Location: Wimborne, Dorset, UK.
Posts: 1,407
Default Re: Kolster Brandes RV 10 (Crown)

Well this really has become a head scratcher! I can't see it being anything else apart from the scan coils, let's see if Johns coils sort this one out once fitted! (fingers crossed)

(I wish you well John not suffering with anything too serious I hope?)

Kind regards
__________________
Lee
Hunts smoothing bomb is offline  
Old 5th Sep 2019, 8:16 pm   #83
Heatercathodeshort
Dekatron
 
Heatercathodeshort's Avatar
 
Join Date: Jun 2005
Location: Warnham, West Sussex. 10 miles south of DORKING.
Posts: 9,145
Default Re: Kolster Brandes RV 10 (Crown)

Posted at Broadbridge Heath this afternoon. We are all holding our breath!

[I'm fine Dom. Just a nuisance not being able to drive at the moment. First time since 1964. The bike can be hard work here in hilly Horsham but I must admit I feel a bit vulnerable but drivers seem very considerate. I'm surprised]

Good luck with the RV10. John.
Heatercathodeshort is offline  
Old 5th Sep 2019, 9:25 pm   #84
sexton_mallard
Hexode
 
sexton_mallard's Avatar
 
Join Date: Sep 2013
Location: Ellesmere, Shropshire, UK & Co. Cork, Ireland.
Posts: 499
Default Re: Kolster Brandes RV 10 (Crown)

Quote:
Originally Posted by Heatercathodeshort View Post
Posted at Broadbridge Heath this afternoon. We are all holding our breath!

[I'm fine Dom. Just a nuisance not being able to drive at the moment. First time since 1964. The bike can be hard work here in hilly Horsham but I must admit I feel a bit vulnerable but drivers seem very considerate. I'm surprised]

Good luck with the RV10. John.
Thank you so much John! Stay tuned for the next update.
__________________
Dom

Less snakes...more ladders!
sexton_mallard is offline  
Old 14th Sep 2019, 12:07 am   #85
sexton_mallard
Hexode
 
sexton_mallard's Avatar
 
Join Date: Sep 2013
Location: Ellesmere, Shropshire, UK & Co. Cork, Ireland.
Posts: 499
Default Re: Kolster Brandes RV 10 (Crown)

After a frankly day at work, I wandered back to my shed to try and console myself that maybe, just maybe it was deflection coils and I will see some light on the screen. I placed the coils that John kindly provided and...I have a raster... of sorts! .

I don't have the magnets or linearity sleeve back on the tube neck yet. Next is to refit these and try and pull the raster out to the whole screen.
Attached Thumbnails
Click image for larger version

Name:	raster-ish.jpg
Views:	279
Size:	31.4 KB
ID:	190134  
__________________
Dom

Less snakes...more ladders!
sexton_mallard is offline  
Old 14th Sep 2019, 8:28 am   #86
Heatercathodeshort
Dekatron
 
Heatercathodeshort's Avatar
 
Join Date: Jun 2005
Location: Warnham, West Sussex. 10 miles south of DORKING.
Posts: 9,145
Default Re: Kolster Brandes RV 10 (Crown)

That looks a bit odd. Make sure you have the connections correct to the line and frame coils.
I would expect maybe slight lack of width/height etc but not such a distorted raster.The lin sleeve will only correct slight errors in width/linearity so no need to fit for a test.
At least it's showing something! Check the coil connections themselves in case of post damage.John.
Heatercathodeshort is offline  
Old 20th Sep 2019, 11:08 pm   #87
sexton_mallard
Hexode
 
sexton_mallard's Avatar
 
Join Date: Sep 2013
Location: Ellesmere, Shropshire, UK & Co. Cork, Ireland.
Posts: 499
Default Re: Kolster Brandes RV 10 (Crown)

I had one of the line coil connections seemingly on the wrong tag, the one in the centre. The frame coils only have two connections. Now I get a 3 inch collapsed frame which varies in height slightly with adjustment of the controls. Boost voltage is up to 640 volts and the brightness has to be turned right down. The tube seems to be good! Present personal circumstances has limited my 'shed' time to tinker away. I will check for causes of the compressed height next.
Attached Thumbnails
Click image for larger version

Name:	WP_20190920_003.jpg
Views:	197
Size:	40.8 KB
ID:	190561  
__________________
Dom

Less snakes...more ladders!
sexton_mallard is offline  
Old 22nd Sep 2019, 9:12 pm   #88
sexton_mallard
Hexode
 
sexton_mallard's Avatar
 
Join Date: Sep 2013
Location: Ellesmere, Shropshire, UK & Co. Cork, Ireland.
Posts: 499
Default Re: Kolster Brandes RV 10 (Crown)

Attention turned to the frame circuit. The vertical linearity pot was scratchy and intermittent but responded to some servisol, measuring in spec. I switched the 2 PCL82s around to see if there was a difference - no difference was noticed. After about 5 minutes the raster expands up to fill most of the screen. I will carry on checking components in the frame circuit. Just out of curiosity I rigged up my Aurora and the set is fairly 'deaf', but that is for later fault finding. I know this set is going to drag its heels but it will be dragged back to a fully working set! This has been a great learning experience so far.
__________________
Dom

Less snakes...more ladders!

Last edited by sexton_mallard; 22nd Sep 2019 at 9:19 pm.
sexton_mallard is offline  
Old 23rd Sep 2019, 8:12 am   #89
Heatercathodeshort
Dekatron
 
Heatercathodeshort's Avatar
 
Join Date: Jun 2005
Location: Warnham, West Sussex. 10 miles south of DORKING.
Posts: 9,145
Default Re: Kolster Brandes RV 10 (Crown)

Yes it has but you have kept at it! The slow opening frame is usually due to a lazy heating PCL82. Swapping the valves may not prove the point as the sound output valve is often in a very much worse state [but still working] than the frame. I have spare PCL82s if you need one.
There should be more than enough sound but that should be an easy one. Regards, John.
Heatercathodeshort is offline  
Old 28th Sep 2019, 9:55 am   #90
sexton_mallard
Hexode
 
sexton_mallard's Avatar
 
Join Date: Sep 2013
Location: Ellesmere, Shropshire, UK & Co. Cork, Ireland.
Posts: 499
Default Re: Kolster Brandes RV 10 (Crown)

John, thank you very much for the PCL82s. The 2 in the set were replaced. Not much improvement to the frame height but the sound from the speaker is much louder. I am now checking all of the components around the frame circuit, the height control is fine. So far, an 1.8M Ohm resistor coupling the height control to the anode of the triode side of the V12 PCL82 had gone high to 4MOhm. A replacement increased the height from 2-3 inches to 5-6 inches. I will carry on checking.
__________________
Dom

Less snakes...more ladders!
sexton_mallard is offline  
Old 5th Jun 2021, 5:38 am   #91
Radio Wrangler
Moderator
 
Radio Wrangler's Avatar
 
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 22,801
Default Re: Kolster Brandes RV 10 (Crown)

Reopened at Dom's request
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done
Radio Wrangler is offline  
Old 7th Jun 2021, 8:47 pm   #92
sexton_mallard
Hexode
 
sexton_mallard's Avatar
 
Join Date: Sep 2013
Location: Ellesmere, Shropshire, UK & Co. Cork, Ireland.
Posts: 499
Default Re: Kolster Brandes RV 10 (Crown)

The quest continues! Slowly working through checking components as the frame is only about 2 to 3 inches high. Is there another published circuit diagram as the R&TVS diagram has hand written values which are difficult to read? Thanks in advance.
__________________
Dom

Less snakes...more ladders!

Last edited by sexton_mallard; 7th Jun 2021 at 9:16 pm.
sexton_mallard is offline  
Old 7th Jun 2021, 9:23 pm   #93
Restoration73
Nonode
 
Restoration73's Avatar
 
Join Date: Jun 2013
Location: Surbiton, SW London, UK.
Posts: 2,801
Default Re: Kolster Brandes RV 10 (Crown)

There are 2 CZ9 thermistors in the field output transformer primary. The original manual
is a clear diagram, and there is a very large range of manuals on the mono TV dvd at
top of page including the RV10, both KB manual and ERT sheets available.
Restoration73 is offline  
Old 7th Jun 2021, 10:37 pm   #94
sexton_mallard
Hexode
 
sexton_mallard's Avatar
 
Join Date: Sep 2013
Location: Ellesmere, Shropshire, UK & Co. Cork, Ireland.
Posts: 499
Default Re: Kolster Brandes RV 10 (Crown)

Quote:
Originally Posted by Restoration73 View Post
There are 2 CZ9 thermistors in the field output transformer primary. The original manual
is a clear diagram, and there is a very large range of manuals on the mono TV dvd at
top of page including the RV10, both KB manual and ERT sheets available.
Thanks for reminding me. I now have all articles and I strongly recommend this great resource.
__________________
Dom

Less snakes...more ladders!
sexton_mallard is offline  
Old 8th Jun 2021, 8:09 pm   #95
FERNSEH
Dekatron
 
FERNSEH's Avatar
 
Join Date: Mar 2005
Location: Gateshead, Tyne and Wear, UK.
Posts: 7,444
Default Re: Kolster Brandes RV 10 (Crown)

Circuit diagram of the timebases in the KB RV10.

DFWB.
Attached Thumbnails
Click image for larger version

Name:	KB_RV10_Timebases.jpg
Views:	97
Size:	78.5 KB
ID:	235615  
FERNSEH is offline  
Old 8th Jun 2021, 10:47 pm   #96
Cobaltblue
Moderator
 
Cobaltblue's Avatar
 
Join Date: Dec 2010
Location: Exeter, Devon and Poole, Dorset UK.
Posts: 6,823
Default Re: Kolster Brandes RV 10 (Crown)

The Manufacturers Service info is available here:

https://www.service-data.com/product...3/13319/m19543

Cheers

Mike T
__________________
Invisible airwaves crackle with life or at least they used to
Mike T BVWS member.
www.cossor.co.uk
Cobaltblue is online now  
Old 20th Jun 2021, 7:30 pm   #97
sexton_mallard
Hexode
 
sexton_mallard's Avatar
 
Join Date: Sep 2013
Location: Ellesmere, Shropshire, UK & Co. Cork, Ireland.
Posts: 499
Default Re: Kolster Brandes RV 10 (Crown)

A much less wiser version of me decided to bulk recap years ago...arrgh. I worked through the frame fault section of the service manual and found C94 missing!

R102 had gone really high which on replacement restored a 50% high raster but clipping a 0.1 cap in the space where a cap was showing from my original pictures taken at the start of this thread resulting in a full raster! It's upside down but turning the yoke 180 degrees should fix that. For the first time on this set, the Aurora was fired up and I have sound but no vision so far. Checks will carry on to see what other mistakes I made. I learned a while ago to never bulk replace components and here's the proof...
Attached Thumbnails
Click image for larger version

Name:	rv10 with full raster.jpg
Views:	163
Size:	66.7 KB
ID:	236153  
__________________
Dom

Less snakes...more ladders!
sexton_mallard is offline  
Old 21st Jun 2021, 8:45 am   #98
Heatercathodeshort
Dekatron
 
Heatercathodeshort's Avatar
 
Join Date: Jun 2005
Location: Warnham, West Sussex. 10 miles south of DORKING.
Posts: 9,145
Default Re: Kolster Brandes RV 10 (Crown)

Keep the scan coils the correct way up and just swop over their connections. A lesson learned with the blanket change. It crops up many times. J.
Heatercathodeshort is offline  
Old 27th Jun 2021, 12:42 am   #99
sexton_mallard
Hexode
 
sexton_mallard's Avatar
 
Join Date: Sep 2013
Location: Ellesmere, Shropshire, UK & Co. Cork, Ireland.
Posts: 499
Default Re: Kolster Brandes RV 10 (Crown)

A clean of the tuner was done by removing the unit and popping off the steel cover. The disc with the channel coils was removed and the contacts polished with some A4 paper dampened with some Servisol. The two valves were removed, sockets cleaned and replaced. The beginnings of a test card tantalizingly are discernable. Things are still amiss with sound on channel 1 and this smeary image on channel 2. I know this set is going to fight me all the way!
Attached Thumbnails
Click image for larger version

Name:	20210626_233105.jpg
Views:	97
Size:	58.0 KB
ID:	236534   Click image for larger version

Name:	20210626_233045.jpg
Views:	114
Size:	55.9 KB
ID:	236535   Click image for larger version

Name:	20210627_002152.jpg
Views:	154
Size:	56.8 KB
ID:	236536  
__________________
Dom

Less snakes...more ladders!
sexton_mallard is offline  
Old 27th Jun 2021, 6:21 pm   #100
Heatercathodeshort
Dekatron
 
Heatercathodeshort's Avatar
 
Join Date: Jun 2005
Location: Warnham, West Sussex. 10 miles south of DORKING.
Posts: 9,145
Default Re: Kolster Brandes RV 10 (Crown)

I would suggest you replace the sync coupling capacitor C55 .1uf between the anode of the video amp to the grid of the sync separator. It will probably be leaky. You will probably have to back check all your work due to the mass change of capacitors. It's very easy to make a mistake that can be very frustrating when fault finding. J.
Heatercathodeshort is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 10:31 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.