|
Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here. |
|
Thread Tools |
28th Jan 2019, 3:34 pm | #1 |
Retired Dormant Member
Join Date: Jan 2019
Location: London, UK.
Posts: 5
|
Dansette RG31
Hello all
I've signed up, as I'm looking for some advice, and would be grateful if your collective, hive-mind, expertise could help. I recently purchased a bruised and battered Dansette RG31, with the intention of stripping and gutting it, covering it, and ultimately, installing a brand new high-end turntable. So far I have stripped and gutted the whole unit, and covered the lid. My next task is to cover the main body itself, which is a daunting task, given the beautiful curves of the RG31. Any advice, tips or suggestions would be warmly welcomed Thank you in advance Rex |
28th Jan 2019, 5:01 pm | #2 |
Dekatron
Join Date: Jun 2013
Location: East Sussex, UK.
Posts: 3,326
|
Re: Dansette RG31
I would have made careful notes & taken loads of photos of how the original covering was applied. You could then replace it the same way. You may find photos on the net that might be good enough to follow.
I don’t think there is any point fitting a “high-end” turntable to a basically low cost unit. It won’t sound any better because of the limitations of the amp & speaker. |
28th Jan 2019, 9:46 pm | #3 |
Moderator
Join Date: Feb 2006
Location: Wembley, Middlesex
Posts: 7,225
|
Re: Dansette RG31
Ii doubt that a ‘high end’ turntable would fit, the cartridge would not be compatible with the internal amplifier, it would need a pre amp. The cabinet and speaker system would not lend itself to performing well with a high end turntable.
My advice: recover the player, service the deck and amplifier and use it as it was meant to be used, |
29th Jan 2019, 3:09 pm | #4 |
Nonode
Join Date: Jan 2008
Location: Milton Keynes, Bucks. UK.
Posts: 2,552
|
Re: Dansette RG31
Rex,
Is the item in working order?
__________________
When I die, please don't let my Wife sell my collection for the amount I told her I paid for it! |
29th Jan 2019, 5:17 pm | #5 |
Retired Dormant Member
Join Date: Jan 2019
Location: London, UK.
Posts: 5
|
Re: Dansette RG31
Hi all
Thanks for the replies. I have completely gutted the unit, so all that's left is a shell. My plan is to recover it, and put in a high end turntable with a built in pre-amp. Basically I like the vintage look of the Dansette but want new, high quality audio equipment. As for the original "mechanics" I believe they do still work. They are currently in a box in my Dad's loft |
29th Jan 2019, 10:59 pm | #6 |
Dekatron
Join Date: Nov 2006
Location: London, UK.
Posts: 3,496
|
Re: Dansette RG31
Oops! This is a vintage restoration forum so I’m not sure you’ll find enthusiastic support for your decision to gut the set, much as you’re entitled to do whatever you like with the remaining case.
I have a friend who does amazing work with Rexine. Maybe look up a few threads on using it, as a first step ? Or ask a more specific question?
__________________
Al |
30th Jan 2019, 8:43 am | #7 |
Nonode
Join Date: Nov 2016
Location: Aberaeron, Ceredigion, Wales, UK.
Posts: 2,887
|
Re: Dansette RG31
Hi Rex.
You can get Rexine from Russell at Retrospecialist.co.uk, I have used them on several occasions. If you want to dispose of the Record deck etc put it in the offers section of the forum. Cheers John |
30th Jan 2019, 10:34 am | #8 | |
Retired Dormant Member
Join Date: Jan 2019
Location: London, UK.
Posts: 5
|
Re: Dansette RG31
Quote:
I have ordered rexine from Russell already, and have completed the lid. It’s just the curves on the main unit itself that worries me… Astral… your friend, does he take on jobs? And if so how much does he charge? |
|
30th Jan 2019, 11:26 am | #9 |
Moderator
Join Date: Jun 2003
Location: Oxford, UK
Posts: 27,966
|
Re: Dansette RG31
I will say it before anybody else does: you have made a very poor choice.
Dansette portable record players have nothing in common with high quality record decks, and were made for a completely different purpose (mostly, playing 45rpm mono pop singles in teenagers' bedrooms). You will find it extremely difficult to find anything decent that will fit in the Dansette cabinet without looking ridiculous, and it has the wrong physical characteristics to act as a deck plinth anyway. Sorry |
30th Jan 2019, 11:39 am | #10 |
Retired Dormant Member
Join Date: Jan 2019
Location: London, UK.
Posts: 5
|
Re: Dansette RG31
Appreciate the honest opinion, however, I respectively disagree.
I’ve already purchased a Pro-Ject turntable (with a preamp) that will fit inside the Dansette nicely. This will be wired to the stereo output on the back of the Dansette, and to the power switch on the front. Turning the power switch will start the new turntable, and light up the little Dansette badge on the front. Vintage look, modern sound |
30th Jan 2019, 12:06 pm | #11 |
Moderator
Join Date: Jun 2003
Location: Oxford, UK
Posts: 27,966
|
Re: Dansette RG31
OK, good luck with it.
|
30th Jan 2019, 12:18 pm | #12 |
Nonode
Join Date: Nov 2016
Location: Aberaeron, Ceredigion, Wales, UK.
Posts: 2,887
|
Re: Dansette RG31
I’ve recovered several rp, my only advice to you would be to practice on an old cabinet/wood item etc first, take your time and don’t put too much Pva onto cabinet or you will get bubbles, a bit like wall papering. Good luck.
Cheers John |