UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Radio (domestic)

Notices

Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only.

Reply
 
Thread Tools
Old 14th Jun 2021, 7:38 pm   #1
Mr_H_RetroTech
Triode
 
Mr_H_RetroTech's Avatar
 
Join Date: Mar 2021
Location: Weston-super-Mare, Somerset, UK
Posts: 12
Default EKCO U353 dropper

Evening all!

I recently acquired an EKCO U353 to be a stablemate to my PYE R33. A brief look inside indicated the U353 needs some TLC. So I resisted the urge to switch on to see what happened.

The back has no burns or damage but is slightly distorted in the area of the dropper. The case is generally in good condition with minor distortion again in the region of the dropper.

The dropper is my first concern as it is looking rather shabby - please see attached photo.

Any advice on best way to deal with the dropper? I have read about people soldering a suitable replacement resistor across the relevant terminals. But this dropper looks pretty rough to me and I'm wondering whether there is much to be done to bring some life into the radio.

Ideas anyone?
Attached Thumbnails
Click image for larger version

Name:	U353_dropper.jpg
Views:	126
Size:	182.0 KB
ID:	235907  
Mr_H_RetroTech is offline   Reply With Quote
Old 14th Jun 2021, 7:41 pm   #2
Station X
Moderator
 
Station X's Avatar
 
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 18,516
Default Re: EKCO U353 dropper

Here's my idea. Measure it to see whether it's actually open circuit.

Always reach for the service sheet and your meter before you reach for the soldering iron.
__________________
Graham. Forum Moderator

Keep the soldering iron hot.
Station X is online now   Reply With Quote
Old 14th Jun 2021, 8:08 pm   #3
Beardyman
Hexode
 
Beardyman's Avatar
 
Join Date: Jan 2018
Location: Portsmouth, Hampshire, UK.
Posts: 339
Default Re: EKCO U353 dropper

Definitely with Graham on this, measure it first to see if it really is open. I've seen much worse looking droppers than yours and they've been perfectly OK. Wirewound resistors can put up with an awful lot of abuse before they give up.
__________________
The difference between stupidity and genius is that genius has its limits. (Einstein)
Beardyman is offline   Reply With Quote
Old 14th Jun 2021, 10:15 pm   #4
David G4EBT
Dekatron
 
David G4EBT's Avatar
 
Join Date: Feb 2003
Location: Cottingham, East Yorkshire, UK.
Posts: 4,539
Default Re: EKCO U353 dropper

You might find this thread of interest and help:

https://www.vintage-radio.net/forum/...d.php?t=164972

As others have said, check the continuity and resistance of. each section of the dropper compared to the circuit and you may well find that itís fine. Lots of other complements which will need replacement, as youíll note from other threads.

Every success with the restoration.
__________________
David.
BVWS Member.
G-QRP Club member 1339.
David G4EBT is offline   Reply With Quote
Old 16th Jun 2021, 12:38 pm   #5
Mr_H_RetroTech
Triode
 
Mr_H_RetroTech's Avatar
 
Join Date: Mar 2021
Location: Weston-super-Mare, Somerset, UK
Posts: 12
Default Re: EKCO U353 dropper

Thanks for your responses. As you might guess this is the first time I have encountered a dropper 'in the flesh', so to speak. I shall do as you suggest and take it from there.

Thanks for link, David. Most helpful as always.
Mr_H_RetroTech is offline   Reply With Quote
Reply

Thread Tools



All times are GMT. The time now is 4:14 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.