|
Vintage Audio (record players, hi-fi etc) Amplifiers, speakers, gramophones and other audio equipment. |
|
Thread Tools |
7th Jun 2011, 9:38 pm | #1 |
Retired Dormant Member
Join Date: Jun 2011
Location: South Yorkshire
Posts: 1
|
Dynatron SXR 32 problem
Hi,
Totally new to any form of record players but have recently purchased a Dynatron, all seemed to be going so well but now I can only hear sound from the stylus and not the speakers & have no idea why? Any help needs to be basic - but am totally willing to learn, any help REALLY appreciated! Hope to hear from you soon. Regards Dan |
7th Jun 2011, 10:48 pm | #2 |
Dekatron
Join Date: Feb 2009
Location: Chesterfield, Derbyshire, UK.
Posts: 3,766
|
Re: Dynatron SXR 32 problem
Hi have you tried headphones ,this could eliminate certain things ie the speakers and the speaker sockets . Mick.
|
10th Jun 2011, 8:03 pm | #3 |
Pentode
Join Date: Dec 2008
Location: Royston, Hertfordshire, UK.
Posts: 131
|
Re: Dynatron SXR 32 problem
A few thoughts:
SRX32 is the chassis number. What is the model number on the label on the back? Some models had speakers built-in, others did not. In all cases, the speakers are connected via the two DIN pattern sockets at the rear. Have these been disconnected for some reason? Is the radio or tape section working OK? |