UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Sets, Parts and Service Information Wanted (private buyers only, no swaps)

Notices

Sets, Parts and Service Information Wanted (private buyers only, no swaps) If you need help obtaining components, sets or equipment, post a message here. Private buyers only - no traders. No swaps.

Closed Thread
 
Thread Tools
Old 9th Sep 2019, 11:32 am   #1
woollyhayles
New Member
 
Join Date: Sep 2019
Location: Wisbech, Cambridgeshire, UK.
Posts: 1
Default Dynatron Goldring G101 drive belt

Hi there,

I've just been reading some of the posts on the forum about the G101.
I'm trying the find a replacement drive belt for my Dynatron Goldring G101. The belt that was on it was approx 1mm square section and the open length is approx 255mm. Do you know of a replacement that is available as I can't seem to find anything that will fit?

Thanks in advance.

Martin Woollard
woollyhayles is offline  
Old 9th Sep 2019, 8:18 pm   #2
Restoration73
Octode
 
Restoration73's Avatar
 
Join Date: Jun 2013
Location: Surbiton, SW London, UK.
Posts: 1,824
Default Re: Dynatron Goldring G101 drive belt

It's triangular cross section
https://www.gettheneedle.co.uk/turnt...ring-g101.html
Restoration73 is offline  
Old 10th Sep 2019, 11:52 pm   #3
dalgwcobl
Pentode
 
Join Date: Dec 2008
Location: Royston, Hertfordshire, UK.
Posts: 123
Default Re: Dynatron Goldring G101 drive belt

If you haven't already done so, I suggest you clean off all the old grease in the bearing and re-grease it. The old grease can turn to toffee and, if doesn't seize altogether, will make life hard for the drive belt and motor, which isn't that powerful to begin with.
dalgwcobl is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 11:17 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.