UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Sets, Parts and Service Information Wanted (private buyers only, no swaps)

Notices

Sets, Parts and Service Information Wanted (private buyers only, no swaps) If you need help obtaining components, sets or equipment, post a message here. Private buyers only - no traders. No swaps.

Closed Thread
 
Thread Tools
Old 2nd Aug 2020, 2:52 pm   #1
Mach One
Hexode
 
Mach One's Avatar
 
Join Date: Sep 2005
Location: Shoreham-by-Sea, West Sussex, UK.
Posts: 430
Default Cannon XLR LNE Connector Screw

I have a connector - it is the kind that would normally go on the lead, i.e. female? It has its screw missing, the one that keeps the case on the actual connector part.

Does anyone have a couple of these Cannon screws - or know where I can get them? They are really tiny...
Attached Thumbnails
Click image for larger version

Name:	XLR LNE.jpg
Views:	68
Size:	100.8 KB
ID:	212459  
Mach One is offline  
Old 2nd Aug 2020, 3:54 pm   #2
Nymrod121
Octode
 
Nymrod121's Avatar
 
Join Date: Apr 2012
Location: Worcestershire, UK.
Posts: 1,788
Default Re: Cannon XLR LNE Connector Screw

Hi Andrew
I have quite a few of these connectors & will gladly send you one in the post (complete with screw) - f.o.c. under the "Crowsley Park Old Pals Act" however it wouldn't be until a week on Monday (i.e. 10th) before I could send it ... can you wait that long?
Guy
__________________
"Halt! - who goes there?"
'Baa-aa-aah ..." ('The Dish': 2000)
Nymrod121 is offline  
Old 2nd Aug 2020, 4:52 pm   #3
Mach One
Hexode
 
Mach One's Avatar
 
Join Date: Sep 2005
Location: Shoreham-by-Sea, West Sussex, UK.
Posts: 430
Default Re: Cannon XLR LNE Connector Screw

Hi Guy,

Thank you for making me laugh! Just what I needed...

Thank you also for your offer. I will PM you!

You are very kind...
Mach One is offline  
Old 2nd Aug 2020, 6:15 pm   #4
barrymagrec
Heptode
 
Join Date: Dec 2017
Location: Morden, Surrey, UK.
Posts: 791
Default Re: Cannon XLR LNE Connector Screw

If you need to source one elsewhere the screw size is 3/8 2-56 UNC csk.
barrymagrec is offline  
Old 3rd Aug 2020, 7:59 am   #5
Diabolical Artificer
Dekatron
 
Diabolical Artificer's Avatar
 
Join Date: Jul 2009
Location: Sleaford, Lincs. UK.
Posts: 5,359
Default Re: Cannon XLR LNE Connector Screw

Looks like your sorted, those little screws in XLR type connectors always get lost, even if you weld them to the the bench.

Andy.
__________________
Curiosity hasn't killed this cat...so far.
Diabolical Artificer is offline  
Old 3rd Aug 2020, 10:20 am   #6
barrymagrec
Heptode
 
Join Date: Dec 2017
Location: Morden, Surrey, UK.
Posts: 791
Default Re: Cannon XLR LNE Connector Screw

Note that the screw for the LNE11 is different to the one used on all the signal XLR 11s.
barrymagrec is offline  
Old 3rd Aug 2020, 3:19 pm   #7
Mach One
Hexode
 
Mach One's Avatar
 
Join Date: Sep 2005
Location: Shoreham-by-Sea, West Sussex, UK.
Posts: 430
Default Re: Cannon XLR LNE Connector Screw

Thank you, barrymagrec, for the information. I didn't know (remember - it's been a while since I have made a lead up with them) but I do now. And you also filled me in with what I tried and failed to find out on the Internet - the actual screw type.
Mach One is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 11:40 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.