UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Amateur and Military Radio

Notices

Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment.

Closed Thread
 
Thread Tools
Old 16th Dec 2022, 9:55 pm   #1
AdrianH
Octode
 
AdrianH's Avatar
 
Join Date: Mar 2020
Location: Blackburn with Darwen, Lancashire, UK.
Posts: 1,566
Default Questions on 160/80 metre AM transmitters.

I have the circuit here for the AT5, but I am confused over the circuit around V1 the VFO

For the EF80 as shown, I can see that g2 (pin 8) is connected with R2 and C3
g1 (pin 2) is connected to R1, C2 and L1.Anode (Pin 7) connected to R3 and C6..
Click image for larger version

Name:	V1.png
Views:	120
Size:	21.7 KB
ID:	269930
But the squiggle that shows where C4 and C5 go is unclear. I am guessing that these are connected to pin 8 the g2, so effectively connected to R2 and C3.

Also that g3 is ls strapped to the cathode.

Can anyone verify this is correct, or what things should be connected to.

Lastly am I correct in thinking that the oscillator is running with the g2 as the anode as it were and that the true anode is giving a buffered output to V2, not sure what this modified Vackar VFO is?

Adrian
__________________
Asking questions and learning, or trying to!
Youtube EF91Valve

Last edited by AdrianH; 16th Dec 2022 at 10:03 pm.
AdrianH is online now  
Old 16th Dec 2022, 10:30 pm   #2
frsimen
Heptode
 
Join Date: Jan 2011
Location: Croydon, London, UK.
Posts: 766
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

There is a photo of the underside of the AT5 chassis on the G4AQB website.

https://g4aqb.files.wordpress.com/20...g?w=1024&h=768

That photo seems to confirm that your understanding is correct.

I think V1 is configured as an electron coupled Vackar. Exactly what the modified bit is, I don't know. The G3PDM receiver used a Vackar circuit with what was described as the original capacitance ratios. This circuit is doesn't use the same ratios, so that could be the modification. I'm sure that someone on the forum will have a more definitive answer.

Paula
frsimen is offline  
Old 16th Dec 2022, 10:38 pm   #3
AdrianH
Octode
 
AdrianH's Avatar
 
Join Date: Mar 2020
Location: Blackburn with Darwen, Lancashire, UK.
Posts: 1,566
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

Thanks I will have a look.

Adrian.
__________________
Asking questions and learning, or trying to!
Youtube EF91Valve
AdrianH is online now  
Old 16th Dec 2022, 11:28 pm   #4
mickm3for
Heptode
 
Join Date: May 2015
Location: Chatham, Kent, UK.
Posts: 947
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

Hi a better circuit checked with my at5 Mick
Attached Thumbnails
Click image for larger version

Name:	at5.jpg
Views:	219
Size:	69.6 KB
ID:	269933  
mickm3for is offline  
Old 16th Dec 2022, 11:57 pm   #5
AdrianH
Octode
 
AdrianH's Avatar
 
Join Date: Mar 2020
Location: Blackburn with Darwen, Lancashire, UK.
Posts: 1,566
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

Thanks Mick, that is a lot better circuit.

Adrian
__________________
Asking questions and learning, or trying to!
Youtube EF91Valve
AdrianH is online now  
Old 17th Dec 2022, 6:47 am   #6
Radio Wrangler
Moderator
 
Radio Wrangler's Avatar
 
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 22,799
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

Electron-coupled amplifier stage (sometimes called 'transitron'). Notice that neither the anode nor the cathode are coupled into the tuned circuit. The tuned circuit is a pi-section which could be as per Vackar, depending on value ratios.

It's quite a neat circuit, getting a degree of isolation to the output more than a non-transitron circuit would give.

The amateur radio world gets a lot too fixated on applying names to oscillator circuits. It's better to look at them and visualise their operation. Also, ask yourself about the usual elephant in the room; what controls the amplitude?

David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done
Radio Wrangler is online now  
Old 17th Dec 2022, 8:39 am   #7
G3VKM_Roger
Heptode
 
G3VKM_Roger's Avatar
 
Join Date: Jun 2012
Location: Southeast Norfolk, UK.
Posts: 772
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

Quote:
Originally Posted by mickm3for View Post
Hi a better circuit checked with my at5 Mick
The cct that Mick has posted was taken from a Short Wave Magazine article. On the copy I have there is a hand-written comment that R1 was changed from 100K to 47K, to improve oscillator starting.

73

Roger/G3VKM
G3VKM_Roger is offline  
Old 17th Dec 2022, 11:18 am   #8
Terry_VK5TM
Nonode
 
Terry_VK5TM's Avatar
 
Join Date: Oct 2010
Location: Tintinara, South Australia, Australia
Posts: 2,324
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

The full text relating to the 47k resistor mod:

Quote:
Some early AT5s had oscillator starting problems, and the value of the grid resistor, R1, was reduced from 100k to 47k to fix this problem. The resistor, R1, is inside the oscillator coil screening can, and quite hard to change. The easiest option is to put another 100k resistor from the grid to ground on the valve socket to reduce the value to 50k if this has not already been done. The factory fitted 47k resistors in the oscillator assemblies once this problem was identified, so your AT5 may already have the right value of R1. A simple resistance check from pin2 of the valve socket to ground should confirm the value of R1, if you are in any doubt.

Dave Gordon-Smith, G3UUR
__________________
Terry VK5TM
https://www.vk5tm.com/
Terry_VK5TM is offline  
Old 17th Dec 2022, 12:21 pm   #9
AdrianH
Octode
 
AdrianH's Avatar
 
Join Date: Mar 2020
Location: Blackburn with Darwen, Lancashire, UK.
Posts: 1,566
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

If someone can let me know which Short wave mag date it is I will try to find it.

The project is going very slow mainly due to other things I have on order that seem to be taking weeks for RM to deliver.

Adrian
__________________
Asking questions and learning, or trying to!
Youtube EF91Valve
AdrianH is online now  
Old 17th Dec 2022, 12:54 pm   #10
Station X
Moderator
 
Station X's Avatar
 
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,192
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

Please let's not turn this thread into a discussion about strikes at Royal Mail.
__________________
Graham. Forum Moderator

Reach for your meter before you reach for your soldering iron.
Station X is online now  
Old 17th Dec 2022, 1:16 pm   #11
ms660
Dekatron
 
ms660's Avatar
 
Join Date: Apr 2011
Location: Cornwall, UK.
Posts: 13,454
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

Test report, schematic etc, Codar AT-5, Short Wave Mag. August 1965:

http://www.g4kfk.co.uk/Codar_AT-5_Tr...SWM_196508.pdf

Plus some mod's:

http://www.g4kfk.co.uk/Codar_AT-5_Mo...s_by_G3UUR.pdf

Lawrence.

Last edited by ms660; 17th Dec 2022 at 1:27 pm. Reason: link added
ms660 is offline  
Old 17th Dec 2022, 1:44 pm   #12
mickm3for
Heptode
 
Join Date: May 2015
Location: Chatham, Kent, UK.
Posts: 947
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

Hi link https://worldradiohistory.com/UK/Sho...WM-1965-08.pdf mick
mickm3for is offline  
Old 17th Dec 2022, 4:03 pm   #13
AdrianH
Octode
 
AdrianH's Avatar
 
Join Date: Mar 2020
Location: Blackburn with Darwen, Lancashire, UK.
Posts: 1,566
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

Sorry for mentioning RM, I will consider my knuckles rapped.

Thanks for the links to the magazine and articles.

Adrian
__________________
Asking questions and learning, or trying to!
Youtube EF91Valve
AdrianH is online now  
Old 17th Dec 2022, 5:29 pm   #14
Bazz4CQJ
Dekatron
 
Bazz4CQJ's Avatar
 
Join Date: Apr 2009
Location: Oxfordshire, UK.
Posts: 4,923
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

In the 1965 SWM review on page 337, there's a comment that on 80m, the 12W from the AT5 invariably got through OK on contacts which had been kicked off with a 100W Tx, which is telling!

How critical would the matching be of the centre-tapped winding on the transformer used for the modulator? I'm wondering about whether the transformer from a Pye Ranger could be used, using the centre tapped winding originally used by the push-pull EL90's in the Ranger modulator ?

B
__________________
Saturn V had 6 million pounds of fuel. It would take thirty thousand strong men to lift it an inch.

Last edited by Bazz4CQJ; 17th Dec 2022 at 5:37 pm.
Bazz4CQJ is offline  
Old 17th Dec 2022, 6:03 pm   #15
G6Tanuki
Dekatron
 
G6Tanuki's Avatar
 
Join Date: Apr 2012
Location: Wiltshire, UK.
Posts: 13,951
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

The matching is 'good enough' with pretty much any 1:1 audio transformer. It assumes that the average DC current through the PA is something close to the average DC in the 6BW6 audio-output stage - get around 45mA flowing in them both and the matching is good-enough, and the magnetic fields from the static DC component balance-out in the transformer same as they would in a push-pull audio amp.

Remember we're not talking hi-fi here!

In times-past I did something very similar with a transmitter using an AUY10 as the RF amp and a NKT404 as the audio amp.

Coupled together using a 12-0-12V winding on a little power-transformer, with a neon across the 240V primary to indicate modulation. Yes - Germanium PA stage and class-A modulator! Both nice TO3 cased transistors, whole thing put out about 10W for 3A current draw from a 12V battery. [will remain quiet about the frequency...]
__________________
I'm the Operator of my Pocket Calculator. -Kraftwerk.
G6Tanuki is offline  
Old 17th Dec 2022, 6:54 pm   #16
Bazz4CQJ
Dekatron
 
Bazz4CQJ's Avatar
 
Join Date: Apr 2009
Location: Oxfordshire, UK.
Posts: 4,923
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

Thanks for that. Somewhere I have three of those oil-filled "bean-can transformers" from early Rangers. They are physically a bit bigger than the small transformer in the original AT5, but seems like they might be OK for a home-brew version. There's a third winding on them, which I think was intended to provide feedback in to the AF pre-amp to provide level-control? I've never seen the circuit for them.

B
__________________
Saturn V had 6 million pounds of fuel. It would take thirty thousand strong men to lift it an inch.
Bazz4CQJ is offline  
Old 17th Dec 2022, 10:18 pm   #17
CambridgeWorks
Nonode
 
CambridgeWorks's Avatar
 
Join Date: Jun 2010
Location: Spalding, Peterborough, Cambridgeshire, UK.
Posts: 2,851
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

Bazz, I don't think they were oil filled. Just potted, maybe resin or just shellac coated windings inside the can. A bit like the W30AM ht inverter transformer in a half "coke can" size.
You are correct, the third winding was used for feedback to the af compressor circuit.
Rob
__________________
Apprehension creeping like a tube train up your spine - Cymbaline. Film More soundtrack - Pink Floyd
CambridgeWorks is offline  
Old 17th Dec 2022, 11:58 pm   #18
Terry_VK5TM
Nonode
 
Terry_VK5TM's Avatar
 
Join Date: Oct 2010
Location: Tintinara, South Australia, Australia
Posts: 2,324
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

I can't remember where I found this, but I have a note in one of the pdf's re the modulation transformer:

Quote:
AT5 mod transformer is NOT centre tapped.
It is 0-110-240v, the 0-110 is the modulator load, the 110-240V wdg goes to the TX

A 15VA centre tap transformer works as well as the real thing
Also note the original parts list shows the mod transformer as an auto transformer, and the description of the circuit calls it a tapped auto-transformer.
__________________
Terry VK5TM
https://www.vk5tm.com/
Terry_VK5TM is offline  
Old 18th Dec 2022, 12:46 am   #19
Bazz4CQJ
Dekatron
 
Bazz4CQJ's Avatar
 
Join Date: Apr 2009
Location: Oxfordshire, UK.
Posts: 4,923
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

Re the Ranger transformer, interesting. I think I have one of the half-coke size transformers too, don't think I knew it was an inverter transformer.

Seems though the original transformer was a slightly unusual component(?), but it did not make any special contribution.
__________________
Saturn V had 6 million pounds of fuel. It would take thirty thousand strong men to lift it an inch.
Bazz4CQJ is offline  
Old 20th Dec 2022, 7:36 pm   #20
AdrianH
Octode
 
AdrianH's Avatar
 
Join Date: Mar 2020
Location: Blackburn with Darwen, Lancashire, UK.
Posts: 1,566
Default Re: Quick question on the CODAR AT5, if anyone has one to hand.

Another question on the AT5,

Looking at the circuit at the coil and cap on the output of the second EF80, described as doubler for the the 3.5 MHz band.

I have always thought of a coil and capacitor in series as a rejector circuit, in that it would appear as low impedance at it's resonant frequency, in which case if it was tuned at 3.5 MHz it would shunt output to ground, not double it, so wondering if the coil and cap is broadly tuned for 1.9 MHz, or have I got it wrong again?

Adrian
__________________
Asking questions and learning, or trying to!
Youtube EF91Valve
AdrianH is online now  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 12:42 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.