UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Sets, Parts and Service Information Wanted (private buyers only, no swaps)

Notices

Sets, Parts and Service Information Wanted (private buyers only, no swaps) If you need help obtaining components, sets or equipment, post a message here. Private buyers only - no traders. No swaps.

Reply
 
Thread Tools
Old 20th Sep 2020, 4:34 pm   #1
kan_turk
Hexode
 
kan_turk's Avatar
 
Join Date: Mar 2014
Location: Dublin, Ireland
Posts: 317
Default Labgear E5185 signal strength meter schematic

Hi All

Iím looking for a schematic diagram , or any other technical info, for the above unit which I have recently acquired in a distressed state - I donít even know if unit is complete - Iíve looked on the web but can only find spec sheet/operation guide (one sheet with no circuit details)
This unit uses a Hopt integrated tuner for which circuit details are available but I would like to get more details of the IF/measurement and power sections before I have to resort to a reverse engineering exercise.

Rgds to all

John
kan_turk is online now   Reply With Quote
Reply

Thread Tools



All times are GMT. The time now is 2:05 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.