|
|
|
|
|||||||
| Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
 |
|
|
Thread Tools |
17th Sep 2014, 10:11 pm
|
#1 |
|
Retired Dormant Member
Join Date: Sep 2014
Location: London, UK.
Posts: 1
|
AVO 160CT help request
Hello to everyone on the forum
After years of faithful service I’ve encountered a problem with my AVO 160CT. Basically everything lights up, turns on as it should, meter responds correctly etc UNTIL the ’Test’ switch is selected whereby the ma reading is ridiculously high and upon turning the spin wheel to measure mutual conductance, the meter needle remains immobile... The last valve I measured before this happened was a EZ80 rectifier that turned out to be problematic and has probably contributed to damaging something inside the tester. Not being very technical I’m not sure what it might be and would appreciate any suggestions you might have or any pointers to somewhere I might get it repaired. Many thanks indeed |
|
|
18th Sep 2014, 8:47 pm
|
#2 |
|
Octode
Join Date: Dec 2008
Location: Wincanton, Somerset, UK.
Posts: 1,780
|
Re: AVO 160CT help request
James:
I have one of these, so if you want some help to sort it out, please drop me a PM. I'm close to Croydon. John |
|
|
